How to save gas and water in wall-hung boiler heating?

1. It is not advisable to turn off the wall-hung boiler when there is no one at home during the day. Just turn the temperature to the lowest level: many office workers are used to turning off the boiler when there is no one at home, and then putting the boiler in a high-end place to heat it quickly after work, which is very unscientific. Because this means that starting from scratch, due to the large temperature difference between the room temperature and the boiler set temperature, the boiler needs time to ignite, which not only saves energy, but also wastes gas, increases the time for residents to catch cold, and there is a danger that the boiler or radiator will be frozen. Therefore, before you go out to work, just turn the heating temperature adjustment knob of the boiler to the "0" position (at this time, the boiler is in an anti-freezing state, the water temperature in the radiator is kept at 35-40 degrees, and the overall indoor space temperature is about 8- 14 degrees), and then you can turn the heating position of the boiler to the temperature you need after work.

2. Turn off or turn down the heating valve of the unoccupied room: If your housing area is large, there are many rooms and few people, it is best to turn off or keep the temperature to a minimum.

3. If you travel for a long time or haven't lived yet, drain the water from the boiler and radiator: I suggest you ask a professional to drain the water from the boiler and radiator, so that you can not only use gas, but also worry about the boiler or radiator being frozen.

Water-saving coup:

1. Try to reduce the number of times to turn on and off the faucet during bathing: because every time the hot water faucet is turned on and off, the boiler will start once, with a delay of about 6 seconds. A lot of cold water will be wasted during this time. Moreover, when the boiler heats hot water, it will burn with fire before reaching the set temperature, which also increases the use of gas.

2. Don't turn on the hot water faucet at once: when the hot water faucet is turned on and the hot water flows out, the boiler has a delay of about 6 seconds. At this time, the pipe between the boiler and the faucet is cold water, so it is cold water even if the faucet is opened to the maximum. If you turn it on to the maximum, you will waste a lot of cold water, so when you use hot water, you should turn on the small water flow first, wait until the boiler starts, wait until the ignition is delayed, and then adjust the water flow according to your own needs, which can save a lot of water and the hot water time is short, especially for large households whose toilets are far from the boiler.

3. Store the cold water flowing out in the container before the hot water flows out: If the small water does not start, it may be that the pipeline in the boiler is dirty or the hot water start-up sensing part is not sensitive, and professional maintenance personnel can be called to solve it.

As a high-power electrical appliance, wall-hung boiler occupies a considerable part of building energy consumption. Reducing the energy consumption of wall-hung boilers is not only the need of economic development, but also an important way to reduce household costs. To understand the energy-saving coup of wall-hung boiler, it is necessary for every user of wall-hung boiler to pay more attention to it in the usual use process. Saving a little every day is a lot of wealth over time.