Where is the Ford Wing Bo car?

Ford Wingbeat Motor is between the gearbox and the engine. According to relevant information, the steps are as follows:

1. The idle motor of the car is above the accelerator cooker. Used to bear the idle speed of the car, the purpose is to adjust the idle speed according to the engine load at idle speed.

2. It is used by the engine controller to control the idle speed of the engine. When the engine speed deviates from the idle speed, it is adjusted by the throttle valve to control the amount of air entering the intake manifold, which is mechanically operated by the accelerator pedal wire rope. The throttle body has a bypass air passage to provide air when the engine is idling (when the throttle is closed).

3. The pivot of the automatic idle motor extends into the bypass air passage. By adjusting the air flow, the engine controller can adjust the engine idle speed by moving the pivot of the automatic idle motor into and out of the bypass air passage according to the input signals of various sensors. When the ignition key is turned to the on position, the automatic idle motor starts to work.