Do epc lamps have anything to do with urea?

It is normal that the consumption ratio of urea and fuel for vehicles is within the range of 3%- 10%. If the consumption ratio of urea and fuel is not within the range of 3%- 10%, the consumption is slow below 3% and fast above 10%.

brief introduction

When the trouble-free light is on, check whether the urea connection pipeline or joint around the urea tank is squeezed or leaked. If not, check whether it is necessary to add regular qualified urea solution. The use of original urea (Clenbuterol urea solution for vehicles) is beneficial to the continuous use and performance maintenance of vehicles.

Epc light and engine fault light may be caused by the fault of engine power electronic regulation system, and the engine must be tested immediately. In most cases, dirty throttle body, vacuum leakage caused by intake system, broken brake switch, and failure to upgrade the engine immediately may all lead to this problem.

Maintenance problem, poor engine maintenance is the most common cause of engine failure. We know that all vehicles have a certain maintenance cycle. If the owner fails to maintain them on time and has bad driving habits, it will increase the burden of engine operation. Finally, you can only remind you to care about your car through the fault light.

As for oil quality, the oil quality mentioned here includes diesel oil and engine oil. We know that diesel vehicles have high requirements for oil products after entering the era of EFI. If the quality of diesel oil filled in the truck is too low, the fault light will also light up. The quality of engine oil is also very important. Try to fill the engine oil according to the manufacturer's requirements, and it is best to go to the manufacturer's authorized service station to maintain and fill the engine oil.

The oil quality mentioned here includes diesel oil and engine oil. We know that diesel vehicles have high requirements for oil products after entering the era of EFI. If the quality of diesel oil filled in the truck is too low, the fault light will also light up. The quality of engine oil is also very important. Try to fill the engine oil according to the manufacturer's requirements, and it is best to go to the manufacturer's authorized service station to maintain and fill the engine oil.