Hooking method and process of mobile phone bag

The process of hooking the mobile phone bag is as follows:

1, we lock the needle 17, turn to 1: short needle without 17, and then continue to add short needle with 16 without 17 (that is, only put/kloc-0.

2. From the second lap, we hook the short needle (spiral hook) to the height you need (the demonstration is to hook 27 laps and pull the last lap).

3. Then we hook the lid directly with segmented dyeing thread:

Coil 1: firstly lock 4, thread it into 1 needle hook, 2 long, 2 long, 3 long (1* * has 4 groups of 3 long), and finally 2 long, 3 long.

Cycle 2: Lock 3, hook 2 is long in the lower space (1 lock, hook 3 is long, lock 2 is long, lock 3 is long in the lower space), repeat the hook method in brackets, and finally hook 3 is long and lock 2 is long in the initial space, and pull it out with a vertical needle. (Note: 3 lengths, 2 locks and 3 lengths are called big V flowers).

Cycle 3: Lock 3, Hook 2, length 1 in the lower space. In this cycle, there is a length of hook 3 in the middle, and the big V flower is still hooked in the big V flower. The pattern between every two spaces should be separated by 1 lock pin. Finally, hook the 3-long 2-lock in the opening space and pull it with a vertical needle.

The fourth circle: three locks, with two long hooks in the space of the big V flower below, and the law behind it is the same as that of the third circle. Finally, hook 3 long and 2 locks in the space of the big V flower at the beginning, pull it out with a vertical needle, and leave the thread end for sewing.

4. Align the woven piece with the bag mouth and the row behind the bag, and pick half a stitch on each inner side.

5. We will make three more spikes with segmented dyeing thread and sew them at the bottom of the bag.

Belt: You can refer to my decorative rope series and choose your favorite style to hook. The demonstration is that after locking the needle, two long needles (or medium long needles) will not be added or reduced. Sew the strap on both sides of the bag.

6. We compare the cover of the bag, confirm the position of the button, and then sew the button on the bag. In this way, a slung mobile phone bag is completed.