How to disassemble and match the modern famous throttle?

Modern disassembly method of throttle;

Remove the connector between the air pipe and the air cleaner box, pliers, 2. Remove crankshaft ventilation pipes T20, 3. Disassemble the air filter box, break it by hand, and then you can clean the upper part of the throttle. If you want to clean it thoroughly, please remove the four screws and the throttle.

Name mapping throttle matching method:

Manual matching: Turn on and off the key of the ignition switch for many times, and the on-board computer will delete the memory of the original throttle, store the data of the new throttle, hit the vehicle, and the vehicle runs normally to complete the matching.

Power-off matching: After replacing the throttle, disconnect the battery cathode and wait for one minute before installation. In this process, the original memory of the on-board computer will be erased, the factory settings will be restored, and the vehicle will start to run normally and the matching will be successful.

Diagnostic instrument matching: After changing the throttle, you can use the special diagnostic instrument for automobiles to match. After entering the system, select the action test and click the adaptive value reset to zero. Do this several times in a row, and the vehicle will start running normally, indicating that the matching is successful.