Should the LaVida throttle be re-matched after cleaning?

After the throttle valve is cleaned, it is necessary to re-equip the special driving computer. Because the throttle is squeezed by carbon deposit, the opening of the throttle will expand accordingly. After cleaning, if it is not reset, the throttle opening will remain in the state before carbon deposition, and the air intake will increase, resulting in unstable idle speed, high speed and increased fuel consumption.

Throttle is a controllable valve, which is used to control air to enter the engine. The upper part is the air filter and the lower part is the engine block. Figuratively speaking, the throttle is the throat of an automobile engine. Whether a car accelerates flexibly has a lot to do with the dirt on the accelerator. Cleaning the throttle can reduce fuel consumption and make the engine flexible and powerful.

Lavida throttle cleaning steps are as follows:

1. Open the engine compartment, disconnect the negative battery, remove the engine intake pipe and drain the throttle position.

2. Unscrew the fixing screws around the throttle assembly and pull out the throttle plug wire harness.

3. Remove the throttle assembly, put on gloves and spray the throttle cleaner.

4. After cleaning, reinstall according to the steps just removed.