How to install Roewe 350 thermostat

Hello, 1 put on a new sealing gasket. 2. Install the thermostat into the thermostat housing, with the main thermostat wax bag with pendulum valve facing outward and the auxiliary thermostat wax bag without pendulum valve turning the two thermostats inward respectively. So that the positions of the swing valve and the vent hole are at the highest point of 10 degrees; 3. Place the thermostat housing assembly in the corresponding position of the cylinder head, install the bolts and pre-tighten; 4. Tighten the screws and bolts in turn with a tightening torque of 8-12 nm; 5. Install the water inlet pipe of the water tank and fix it with clamps. 6 Install the warm air intake pipe and fix it with clips. 7 Refill the coolant. done