How to match the throttle of the eighth Accord with 43 1

After cleaning the throttle, the idle speed is too high (1000- 1500 rpm), so it is necessary to set the throttle with an instrument.

Throttle setting conditions:

1 Engine flameout

2 Ensure that the automatic transmission gear is in N gear and the manual gear is in neutral gear.

3 Use the parking brake (hand brake).

4 The engine system is trouble-free.

Setup program: using decoder

Enter the engine system and clear the fault code.

1. component action test

Enter TP position check ",

Screen display:

* "The device will reset the IP learning value if it is reset",

*" IP learning value, at the same time need to clean the throttle. Press confirm.

Screen display:

* "Do you want to reset the IP learning value? Press confirm

Screen display:

* "Engine flameout

* "Please make sure that the shift gear is in the N position.

* "Press the parking brake to confirm.

Screen display:

* "All syringes stop working and should be used after the work is completed.

* "Tester resets ECM/PCM, otherwise the engine

* "will not start. Press ok.

Exit component test entry

Engine control module/powertrain control module reset

Screen display:

"Matters needing attention:

"Please make sure that the transmission gear is in N gear.

"Use the parking brake.

"The engine won't start, press the enter key.

Screen display:

"Reset the ECM/PCM.

"Please wait a moment. ...

"ECM/PCM has been reset!

"Press any key to exit.

Throttle setting is complete.