Buick Regal Throttle Matching (Buick Angkor Tire Pressure Matching)

Start the engine and unplug the water temperature sensor; Unplug the air inlet of the air filter, block the air inlet, and let the engine run at idle speed for about one minute; Plug in the plug again and loosen the air inlet, so that the engine temperature can be normal and the matching can be successful.

Throttle is a controllable valve, which controls air to enter the engine. After the gas enters the intake pipe, it will be mixed with gasoline to form a combustible mixture, which will be burned to do work. It connects the air filter and the engine block, and is called the throat of the automobile engine. Specific matching method: 1. Start the engine; 2. Unplug the water temperature sensor (note: this water temperature sensor is connected to the computer, not the water temperature meter), and let the computer adjust the fuel injection amount according to the engine water temperature reaching 80 degrees Celsius; 3. Unplug the air inlet of the air filter, block the air inlet, and manually control the air inlet to make the engine speed reach the normal idle speed (800 rpm) and keep it for about one minute; 4. Plug in the water thermometer sensor again, and then loosen the blocked air inlet. At this time, the engine speed rises, but the idle speed will be controlled immediately according to the signal of the water temperature sensor-suddenly drop. If the engine temperature is normal and the idle speed is normal, the manual matching is completed.

Million car purchase subsidy