Method for manufacture clay fan

The manufacturing method of Tao Jin sector is as follows:

1. Preparation materials: including fan-shaped materials such as gold foil, glue, rice paper or silk, brushes, brushes and other tools.

2. Selection of fans: Choose suitable rice paper or silk with smooth surface and soft texture.

3. Glue preparation: mix a proper amount of glue with clear water and stir evenly.

4. Sticking gold foil: Cut the gold foil into appropriate size, dip a proper amount of glue with a brush and apply it to the fan, and stick the gold foil to the fan.

5. Fan drying: Put the pasted fan in a ventilated and dry place and dry it for about 24 hours.

6. Trim the sector: Trim the sector gently with a brush to make the gold foil and the sector fit better.

7. Completion of production: After the above steps are completed, the clay sector is completed and can be mounted or collected.

Precautions:

1. Care should be taken to avoid tearing or falling off the gold foil in the production process, so appropriate materials and tools should be selected.

2. Pay attention to the proportion and concentration when mixing glue, so as not to affect the pasting effect.

3. When pasting the gold foil, please handle it gently to avoid damaging the sector or the gold foil.

4. Avoid direct sunlight when drying the fan, so as not to affect the color and quality of the gold foil.

Suggestions on making materials from clay gold ore;

1. Sector material: choose a sector material with soft texture and smooth surface, such as Xuan paper or silk. These materials can better adsorb and fix gold foil.

2. Gold foil quality: choose gold foil with high purity, moderate thickness and soft texture. The quality of gold foil directly affects the appearance and texture of clay fan.

3. Glue selection: Use special painting glue or gelatin with moderate viscosity, which can better stick the gold foil to the fan.

4. Preparation: Before making, the fan-shaped materials should be properly treated, such as cleaning and drying, to ensure the quality and applicability of the materials.

5. Tools: Prepare appropriate tools, such as writing brush, brush and paper cutter. , in order to better production.

6. Gold foil treatment: Before sticking the gold foil, you can gently wipe the gold foil with a soft cloth to ensure that the surface of the gold foil is clean and free of dust or impurities. This can increase the adhesion between the gold foil and the fan.