Intelligent engine started without response.

The solution of no response when the intelligent engine is started is as follows:

1. The battery voltage is too low: you can turn on the headlights and some electrical equipment. When starting, check whether the instrument and indoor lighting are obviously dimmed. If it is dark, it means that the battery voltage is not enough to drive the engine to reach the starting speed.

2. Too much carbon deposit in the intake pipe: too much carbon deposit will reduce the power, accompanied by a certain degree of fuel consumption increase. This is because when obtaining the same power as before carbon deposition, it is necessary to increase the throttle opening and the corresponding fuel supply. If there is carbon deposit in the air duct, it will affect the normal intake of the engine, and the carbon deposit will hinder the intake, resulting in insufficient intake of the engine. When the air intake of the engine is insufficient, the output power of the engine will be unstable. You can remove the intake pipe of the car, use special tools to remove carbon deposits, or use cleaning agents to remove carbon deposits accumulated in the intake pipe.

4. Starting motor or related circuit failure: the electromagnetic coil can't keep meshing, can't provide starting torque, and the engine can't start. The starting motor needs to be replaced or the related circuit is out of order.

5. Ignition system failure: This will directly cause the engine to fail to start. The solution is to check the working conditions of spark plug, high voltage line and ignition coil, and whether there is too much carbon deposit in spark plug. Once found, clean or replace the spark plug immediately. Million car purchase subsidy