How to reset the electronic throttle after cleaning?

According to different models, the method of re-matching is different. For example, some cars can reach second gear when typing. The meter indicates a completely lit person. Then wait for 20 seconds, then press the accelerator to the bottom and hold it for about 10 second, then release the accelerator, turn off the ignition switch, remove the key, and the initialization is completed. Mazda is like this. After cleaning the electronic throttle, reset yourself: 1. The second gear to open the key is the person whose instrument indicates full light. Then wait for 20 seconds, then press the accelerator to the bottom, keep it for about 10 second, then release the accelerator, turn off the ignition switch, pull out the key, and the initialization is complete. 2. Turn on the key pinion for 30 seconds, then turn off the ignition switch and pull out the key; It should be noted that after both methods are finished, try to ignite later. Generally, just wait 15-20 seconds. Then ignite, confirm whether the oil supply is normal and whether the engine fault indicator lamp goes out. If you fail once, do it again until you succeed. You can usually succeed once, at most twice. 4. But different cars have different recovery methods, and some cars must be initialized by computer.