How to match Buick throttle?

You can only go to the 4S shop and the corresponding repair shop for valve matching.

Attention should be paid to how to clean and prevent throttling:

1, which should be dismantled and cleaned;

2. Correct some mistakes in cleaning the throttle valve;

3. The fouling of the throttle is mainly engine oil vapor, followed by particles and moisture in the air. That is to say, using a qualified air filter and removing the crankcase ventilation pipe, the fouling speed of the throttle will be much slower.

4. The crankshaft is built in the crankcase, and the lower part is connected with the oil bottom. The working temperature of this part is about 100 ~ 180.

5. How long the throttle will be dirty depends on the quality of the air filter, the brand and quality of the engine oil, the condition of the driving section, the temperature, the working temperature of the engine, driving habits and so on. If the time for cleaning the throttle cannot be determined by a fixed number of kilometers, the interval between the first cleaning of the throttle for a new car is the longest, and the cleaning frequency will increase due to the constant condensation of oil and gas in the crankcase ventilation pipe and air inlet, and different weather conditions will also affect the speed of throttle scaling.