What is the detailed step diagram of cutting window grilles?

Cutting window grilles requires a pair of scissors, a pencil and a piece of red paper. Fold the paper-cut first, then draw a paper-cut pattern, then cut off the excess paper along the drawn line and unfold the following pattern, and the paper-cut is completed. Here are the detailed steps:

1. First, fold the square paper-cut diagonally.

2. Continue to fold diagonally again.

3. Then fold back along the center line of the triangle, as shown below.

4. Fold the other side back.

5. Draw the following picture on the paper with a pencil, as shown below.

6. Cut off the redundant graphics with scissors, leaving only the drawn graphics.

7. The pattern left after cutting is as follows.

8. The expanded diagram is a simple paper-cut diagram.

Matters needing attention

1, draw a figure with an erasable pencil.

2. Paper-cutting should be done slowly along the drawn line, and never cut it.

3. Paper-cutting is used in paper-cutting. It is best to choose paper with moderate hardness, not too hard.