Installation Skills of Indoor Balcony Dryer Introduction of Installation Steps of Indoor Balcony Dryer

Do you know anything about indoor balcony drying racks in your daily life? Don't worry, friends who don't know. Next, Bian Xiao will take you to see the related contents of the indoor balcony drying rack. With the development of our social and economic level, our pursuit of quality life is getting higher and higher. The original method of hanging clothes outdoors with wire is out of date. Nowadays, people mostly use indoor balcony clothes racks to dry clothes. Next, Bian Xiao will take you to know!

Introduction of installation skills of indoor balcony dryer-preparation before installation

Preparation before installation of indoor balcony drying rack: electric drill, tape measure and chalk. Let's take a look at the accessories including hand crank, handle, pulley frame, corner device, lifting ring, fixed cover, expansion screw, wire rope and lifting lug.

Installation Skills of Indoor Balcony Dryer —— Installation Steps

1. Find the installation position of the hand crank and punch it: it is suggested that the height of the hand crank is 1M- 1.2M from the ground, and then determine the position of the corner crank (note: the position of the corner crank must be perpendicular to the position of the hand crank, and the red circle is the installation position of the hand crank).

2. Next, determine the positions of the four pulley frames: the distance between the two sides of the pulley frame and the wall is not less than 27CM, the vertical distance between the two pulleys is not less than 45CM, and the horizontal distance between the two pulleys is 18CM or 2M, generally 2 m. The specific pressing position depends on the actual situation of the household balcony. After the installation position is determined, use the pulley frame to determine the punching position. Next, install expansion screws on the pulley frame: one ***4, two single pulley frames and two double pulley frames. Similarly, install two expansion screws on the corner adjuster.

3. Start to install the hand crank: fix the hand crank with expansion screws, then tighten the expansion screws with tools, install the handle, tighten the screws on the handle, and then shake out all the wire ropes in the hand crank. When shaking out the wire rope, it is necessary to pull the wire rope to avoid wire disorder until the handle can't turn (this function is unique to life and has anti-shake braking function). Pull out the other wire rope in the same way, as described above. Note: There are two wire ropes in the crank handle. Push the handle to control the left and pull it out to control the right.

4. Next, start threading the wire rope: open the package, which contains two wire ropes with the same length. First, hold both ends of the wire rope and thread it into one of the corner devices. Then, pass both ends of the wire rope through one of the double pulley frames. The two wire ropes are parallel and not twisted. Pull one end of the wire rope from the bottom of the double pulley frame to the position close to the crank, and pull the other end through the angle adjuster. The other wire rope operates in the same way as the previous one. Then, shake the button at one end of the wire rope out of the crank. Install the fixing cover.

5. Rope threading: Next, thread the two long steel ropes on the double pulley onto the other two single pulleys, and install the fixing cover as well. Cut the rope flat: Next, cut the four ends of the wire rope flat, about the height above the handle, then install the lifting rings, then put the four lifting rings on both ends of the two drying rods, and then put the lifting lugs on both ends of the drying rods, thus installing the drying rods.

6. Assembly: Install the last two groups of small accessories, so that the whole indoor balcony drying rack is installed.

The above is Bian Xiao's detailed introduction to the installation method of indoor balcony drying rack. How's it going? After reading Bian Xiao's introduction, do you have a certain understanding of the installation method of indoor balcony drying racks? Will we all install hangers ourselves after buying them? If you have friends who want to install it by themselves, you can take a look at Bian Xiao's suggestions to make your balcony more perfect. Bian Xiao, that's the end of today's introduction. I hope I can help you.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~