Traditional Culture Encyclopedia - Traditional culture - How to clean the vacuum cleaner

How to clean the vacuum cleaner

After our family bought a vacuum cleaner, the biggest function was to help us clean the household hygiene. But after cleaning the dust, the vacuum cleaner should be cleaned in time to ensure the normal work next time. Today I will introduce our methods of cleaning dust and vacuum cleaner, hoping to help you! Why clean the vacuum cleaner?

A vacuum cleaner is a small household appliance that we use to clean. In the usual use process, the vacuum cleaner is in direct contact with dust, garbage and other items, so the vacuum cleaner is very easy to be contaminated with dust, especially the dust bag in the vacuum cleaner, which is filled with various garbage items. If it is not enough to clean the vacuum cleaner just by dumping garbage into the dust bag, the vacuum cleaner must be cleaned, especially after each use. Keeping the vacuum cleaner clean and dry for a long time can not only facilitate each use, but also protect the vacuum cleaner and effectively prolong its life.

How to clean the vacuum cleaner

1, neat appearance

In fact, it is relatively easy to clean up the appearance. Generally, it only needs to be wiped with a soft cloth dipped in soapy water, but it must not be cleaned with organic solvents to avoid cracking, fading or paint loss of the plastic. Of course, it must not be cleaned with hard objects such as steel balls, so as not to cause harm to the body.

2. Filter cleaning

For the filter with used filter paper as filter medium, dust on the filter paper can be brushed off with a soft brush. Be careful when brushing dust, don't brush filter paper. For the filter with flannel as the filter medium, it should be cleaned with cold water first, and then dried. Never use hot water to wash the foam or dry it, otherwise it will block the pores and affect the suction when vacuuming.

3. Deodorization

When using a vacuum cleaner, the most annoying thing is the hot smell from the exhaust port. Before using the vacuum cleaner, cotton can be dipped in lemon juice and put into the vacuum tube of the vacuum cleaner. In this way, when you use this "feeding" vacuum cleaner to vacuum, there is not only no smell in the room, but also a faint lemon fragrance.

4. Cleaning of dust bag

Pour out the dust debris in the dust bag, wash it with detergent, then clean it with water and dry it in the sun. If you put in the vacuum cleaner without drying, the dust bag will be extremely dirty when the vacuum cleaner sucks again. The part of the vacuum cleaner attached to the ground can be brushed with a brush, and the entangled garbage can also be taken out with a toothpick or bamboo stick. Due to strong adhesion, silk thread, hair, etc. can only be removed by hand.

Daily maintenance method of vacuum cleaner

Before using the vacuum cleaner every time, observe whether the dust bag of the vacuum cleaner is damaged. If it is damaged, stop using it immediately, and also check whether the dust bag is clean. Check whether the switch, wire and plug of the vacuum cleaner are in good condition, and then continue to use the vacuum cleaner after confirming that there are no above problems. At the same time, it is also necessary to regularly check whether the internal parts are rusted and fastened. Cleaning the vacuum cleaner regularly is mainly to ensure that the vacuum cleaner stays clean for a long time and does not accumulate dust in the vacuum cleaner. If you often use the vacuum cleaner, you only need to clean the vacuum cleaner carefully after each use.

Daily maintenance method of vacuum cleaner

The maintenance of the vacuum cleaner should start with each use of the vacuum cleaner. First of all, it is recommended not to use the vacuum cleaner for more than two hours. If you use the vacuum cleaner for a long time, it will overheat the inside of the vacuum cleaner and affect the life of the internal parts. In addition, we should also pay attention to the position of the vacuum cleaner when it is not in use. Generally, it is advisable to put it in a dry and ventilated corner, not in a damp or corrosive gas position.