The whole process of making ceramic tile cabinets

The manufacturing process of ceramic tile cabinets is as follows:

Tools: tile glue, ceramic tile, structural glue, PVC board, tempered glass board.

1. First of all, make sure that the ground is flat, and make a platform with a height of 105 cm by playing the keel with tile glue.

2. Lay the first tile on the bottom plate and install the frame.

3. After fine-tuning, lay the second tile.

4. Install the outer side plate first, and then the inner side plate. Install the first inner side panel and then install the second inner side panel.

5. Install the side plate and back plate.

6. Install the laminated board, and install the second laminated board after the structural adhesive. The laminated board adopts PVC edge sealing, and the slope structure of edge sealing strip is convenient for hygiene.

7. Make other spaces according to the above procedures, and install tempered glass decorative plates on the glossy surface.

8. Install the first top plate and the second top plate in turn.

9. Install the countertop.

10, the skirting line is treated with ceramic tile finish, and the skirting line is embedded with 4 cm to ensure that the toes are not easy to kick into the cabinet during use.

1 1. Install the cabinet door.