How to remove the switch panel of bath bar?

Question 1: Which one knows how to remove the switch panel of the Opal bath heater ah? The same as the switch panel, the top has let you warp the seam of the big month of three millimeters or so, don't be afraid of bad hard warping!

Question 2: how to remove the Opal bath bar switch panel Remove the Opal bath bar switch panel with a small one-word screwdriver on the side to pry it can be removed.

Question 3: How to remove the Opal single switch press plate

Question 4: How to remove the bath bar switch from the wall, did not see where there are screws ah? This switch surface embedded, there are screws inside! Your home enameled bath bar panel is buttoned up, with a screwdriver around the panel gently warped can be warped open, remove the panel, and then take the twisted screws.

The springs are deformed because they have been in use for a long time and don't work!

Question 5: Oppo bath control switch want to remove the panel, is to take a tool against the wall stuffed in prying or ...... general switch underneath or left and right are designed with a small mouth, called the disassembly port, with a screwdriver with a head *** to pry open the outside panel.

Question 6: How to remove the bath bar switch button Hello,

This switch surface embedded, there are screws inside! Your home bath panel is buttoned up, with a screwdriver around the panel gently warped can be warped open, remove the panel, and then take the twisted screws. The springs are deformed because they have been used for a long time and don't work!

Question 7: Which key can take down the bath bar switch panel are able to

Question 8: How to disassemble the bath bar light like this? Hello!

This integrated ceiling bath bar light, installation is very simple, take down the panel is also very simple. The picture below, is your bath light in kind, added tips, please an operation can be removed from the panel. Another picture of the installation schematic of the integrated bathroom light for your reference.