Which is better, fire or main fire?

There are obvious differences between concentrated strong fire and main fire in gas stoves: main fire centralized control system (main fire centralized control)

According to the principle of combustion kinetic energy and fluid mechanics, combined with the characteristics of flame combustion, the main fire was innovatively changed from the outer ring to the middle ring, and combined with the limit fire.

Innovative patent designs, such as power diameter, double channel and double-angle flame path, have achieved the balance of key technical indicators such as heat flow, thermal efficiency and CO emission.

Problem, to achieve balanced combustion, * * * to enjoy fresh and delicious.

Main fire center setting: 1. Change the traditional flame from the main fire in the outer ring to the central ring, and the main fire will be more powerful.

Concentration;

2. Limit flame diameter 10CM, traditional flame diameter12cm; ;

3. Solved the shortcoming of the traditional cooker that it lost a lot of heat.

Less, the heat flow reaches 2.2KW (traditional 0.5 kW);

4. The design of double-channel oxygen tank greatly improves the combustion rate and makes the combustion more complete.

Less carbon oxide emissions (national standard: 0.05%; In the main fire: 0.03%), save gas.

Concentrate on the fire:

1, the main fire is still the first skill.

At present, due to technical reasons, it is impossible to extend the main firepower center to low-end models;

2. Gathering people is a part of Hawking's reform, and the main firepower is concentrated in Central, which is comprehensive.

The combustion effect is basically the same as the main fire, but some heat is still lost;

3. The research and development of the two have certain continuity, and they are all focused on fire.

Each index is between the main fire and the traditional cooker.