How to use the floor tile joint agent? Detailed examples of steps and methods

Perhaps many consumers and friends will feel distressed because the gap between the floor tiles installed on the ground is too large, which leads to the troublesome problem of water seepage and leakage in the later period. So how can we avoid the hidden dangers left by this aspect as much as possible? Interested friends can refer to the following. Today, I'm going to explain to you the suggestions on the purchase process of sewing glue and the recommendations and explanations of some brands. I believe this can help us screen out a beautiful sewing glue with excellent quality and performance at a lower price as much as possible.

1. How to design the reserved width and width of tile joint: In general, the reserved width of tile joint is 1mm-8mm and the depth is 1mm-2mm. The whole effect is good after filling the narrow tile joint, and the three-dimensional effect is good after jointing the tile joint, with strong layering, easy control and small sleeve size error.

Tile reserved joint: positioning cross can be embedded in the joint of tile, which is convenient to ensure the width and width of tile are consistent. Then use ordinary cement or white cement to lay the bottom and fill the joints. After filling, level and compact the joint with wicker to keep the joint depth about 0.5-1.5 mm. ..

Drying period: After the paving and joint filling are completed, the cement material in the joint can be completely dried, and then the jointing construction of sealant can be carried out, and the dust in the tile can be removed with a rag.

Second, two construction methods of floor tile joint sealant

1. Construction method: put the caulking agent into the glue gun, and then slowly and forcefully drive the material into the joint. After laying a joint (about 0.2m), first block the nozzle with a wooden wedge, and then immediately scrape off the sealant with a small scraper or finger. The overflow materials on both sides of the brick joint can be wiped off with a wet sponge, and must be wiped off before the sealant solidifies. After each wiping, the sponge should be washed with water for reuse. If the joint width is greater than 3mm and the caulking agent filled into the joint of ceramic tile is relatively uniform, then it is not necessary to scrape the caulking agent and let it level automatically.

2. Leave a gap with a depth of1mm.. Before using sewing thread, clean the dust and other sundries in the seam with a rag or a fine brush. Stick masking paper on both sides of the seam. It is advisable that the masking paper is about 0.5mm away from the edge of the gap. Put the caulking agent on the glue gun and drive it evenly along the brick joint. Construction is about 1 m, which should be evenly daubed with fingers or a small scraper immediately; When the masking agent is not cured (about 1 m in construction), the masking paper can be removed conveniently.

From the above examples, we can know that, generally speaking, glue joint is an auxiliary tool to make up and repair some cracks, such as common floor tiles or wall tiles. If the gap between the two is too large, it will affect the overall aesthetic visual effect and overall harmony, and may also lead to problems of infiltration and water leakage in the later stage. Therefore, with the help of joint glue, the defects and troubles left in this respect can be effectively made up.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~