My table tennis is ok, backhand and backhand backhand backhand, loop ball and spin combined with fast break, straight cross shot. How to deal with, treat and defeat long rubber players?

There are four magic weapons in the long rubber hitting method. First, the past ball does not rotate downward, but rotates upward like anti-glue, so it is easy for the opponent to wipe the high ball or pull the ball out of bounds. Second, when defending, the ball that blocked the return shot is not slightly topspin, but backspin like reverse glue, not forward, and the stronger the opponent, the more obvious this feature is. It can be said that the ball blocked by long glue is usually a high-quality force reducer, and the opponent can't borrow force, so it is easy to get off the net again. This is why the defense of long glue is more powerful than other glue. Some players who use backhand to block defense basically attack forehand. The third is the long glue attack, which attacks the past ball and has obvious sinking characteristics. When the opponent hits back, he feels that the ball suddenly becomes heavier and goes straight down, which is extremely difficult to adapt to, which is the biggest threat of the long rubber attack; Another feature of long rubber tapping is that it does not have obvious forward impulse like reverse rubber and positive rubber, which sometimes gives people a feeling of weakness. When an opponent leaves the defense, he often has to reach for the ball. These characteristics easily lead to the opponent's mistakes in front of the net when returning the ball. Fourthly, when the opponent attacks, the long rubber chop can give full play to the spin-borrowing function of the long rubber, and the backspin degree of its return ball is often beyond people's imagination. Even if the arc of the ball is slightly higher, it is likely to attack the net again. The only way is to slow down and lift the ball deliberately, which is very beneficial for the long rubber players to calm down and cut the ball, which is conducive to the counterattack. This is why some chippers like to use long rubber.

Long rubber itself lacks the ability to actively create rotation, and sometimes it can be used as a means to control people. For example, when serving, it is easy for the opponent to throw a high ball if he presses the topspin and backspin, but this method can only be used in conjunction. In practical application, it is best to combine it with the reverse glue or positive glue on the other side of the racket to increase the discomfort of the opponent.

(B), long rubber is subject to people-how to deal with long rubber

In order to deal with long rubber, we must have a general understanding of the rotation law of long rubber in theory, make more contact and gradually realize it in practice, so as to quickly master the method of dealing with long rubber. After we are familiar with the playing style of Long Jiao, we will no longer be afraid of the strange performance of Long Jiao. The comparison between the two sides is basically the basic skill of playing. When playing table tennis, you must make a hitting action on the basis of correctly judging the rotation of the incoming ball. When playing anti-glue, due to long-term contact, everything can be done subconsciously, and at the same time, some conscious adjustments are made to the long glue, because sometimes the rotation nature of the ball it returns is opposite to that of the anti-glue, so the energy spent on judging the rotation of the incoming ball is correspondingly greater. The rotation of the long rubber ball is obtained by "borrowing rotation", which has the characteristics of "you don't turn it, the more you turn it, the more you turn it", so there are rules to follow, which is why the long rubber ball is easy to be controlled by people. So now the long rubber ball has been combined with other rubber balls (usually anti-rubber balls) on the other side of the racket, and there are very few players who simply play the long rubber ball.

How to deal with long rubber:

First, serve.

1, serve the long ball to the long rubber backhand position, and then prepare to attack, rush and pull the opponent's backhand baseline.

2. When the serve spins down the long ball, you should always cooperate with the serve to spin the long ball to the opponent's bottom line to interfere.

If you can't serve the short ball to the opponent's forehand position, don't come out and attack again.

Second, serve.

1, the opponent serves a spin ball, which is mainly left, click and pick. The ball returns to the opponent's baseline, and it is best not to rub it, so the opponent is not given a chance to arch the ball.

2. Try to change the opponent's serve to topspin first.

Third, stalemate.

1, strive to get started first, and in the case of bad opportunities, focus on pulling down.

2. If there is a chance to get the ball, the opponent will pull the backhand baseline.

In a word, long rubber has two fatal weaknesses: fear of spin-up and long spin-down, and fear of spin-up and spin-up.

The principles to be followed when handling long rubber are:

(1), first of all, we should deal with the non-rotating ball or topspin hit by long glue. That is to say, after the long rubber hits the backspin ball by rubbing, blocking and arching, we should pay great attention to pressing the shape of the racket, hitting the ball less, or pushing the ball hard to prevent the ball from going out of bounds. The consequences of friction are often higher and higher, giving opponents an opportunity. It is also necessary to rub more boards forcibly.

(2) It is the key to improve the continuous attack ability and prevent the second board from attacking the net after 1 board attack. In a continuous attack, one board needs to add more upward force than the other.

The above (1) and (2) are the most basic methods to deal with long rubber, and they are the touchstone to measure whether you can deal with long rubber. If you don't master it well, it will be very difficult to win the long glue if the basic skills of both sides are at the same level or the level of long glue is slightly lower.

(3) The most important tactic to defeat the Dragon Horn is to pay attention to the attack of the first few boards. Dragon horn players are mostly good at fighting and stalemate. The more balls go back and forth in a stalemate state, the more it can fully reflect the strange style of the dragon horn, and the difficulty of judging the rotation of the incoming ball will be greatly increased. Therefore, against Longjiao, we must make great efforts in the first few boards and strive for the death of one board. If not, try to reduce the quality of the opponent's return ball for convenience. When you serve yourself, try to serve and attack. One of the common methods is to serve the backspin to the opponent (when the forehand backspin is used, the backspin can be served to its backhand position). When it grabs the ball back by rubbing and blocking, it should decisively receive the service according to the topspin; The second is to make a slightly upward rotation or not to turn the ball to the opponent's bottom line, and wait for the long glue to block the ball back and press it not to turn the ball to attack; Third, because the long rubber is not easy to eat and spin, it is easier to attack the spinning ball, especially the backspin ball, so when you meet an aggressive long rubber master, you should guard against the opponent's receiving and attacking; But under normal circumstances, the opponent will not try his best, and the impact of the long rubber before attacking the ball is weak and slow, so pull back or push back is the first choice. If you spin back when receiving the service, as long as the long glue is rubbed or blocked, the fourth board should pay more attention to the attack. If the opponent serves with a long rubber edge, when the incoming ball is not too short, it should also be treated as a non-turning ball. At present, after several boards are forced into stalemate to solve the problem, we should be prepared for a protracted war. Generally speaking, they should give priority to pulling and attacking with moderate intensity, and pay attention to the landing point. As long as the other party can't turn back, it's half the battle. Because there are not many balls that have been attacked in the past, there are not many balls that have been returned by Longjiao. On this basis, we will continue to seek and create opportunities to attack by force. When it is too late to judge whether the incoming ball is spinning or not in the right position, it is not easy to exert force to avoid mistakes.

(4) Because the attack of the long rubber ball has the characteristics of sinking, it is necessary to move up slightly to avoid getting off the net when defending with the push block, and retreat to the middle platform to defend can reduce the threat of the long rubber ball attack.

Due to the influence of the characteristics of dragon glue, most of them are amateurs. Long glue is rarely taught by regular coaches. If you want to play well, you must first read some information from books and online, which is why there are many people playing dragon glue online, but few people playing dragon glue in reality. Occasionally, it is a horizontal plate with positive and negative length. The main means is to control each other with long glue, find a breakthrough, and solve problems with anti-glue. When I was a beginner, I checked all the posts about Longjiao on the Internet. These posts gave me a preliminary understanding of dragon glue. After playing for a while, I found that the dragon glue changed a lot. As long as I have good skills and strength, I can still change by myself. I will post my experience about Dragon Gum, and ask the experts of Dragon Gum to give me more advice.

Second, how to adapt to long glue

When hitting a ball with long tooth glue, the ball will fall on the opponent's table after running in the air, which will show different characteristics from the usual positive glue and reverse glue. That is to say, the way of hitting the ball is the same, but the receiver's feeling is different from the ball hit with reverse glue and positive glue, which leads many amateurs to feel that their skills can't be brought into play and often make mistakes when playing with people who play with long glue. In view of this, this paper will introduce the general performance of long rubber racket to amateurs, and then talk about the basic treatment methods of common techniques of long rubber.

Basic methods of common technology of Huilong glue

(A) the way to return to the block

Forehand and backhand blocking is one of the common techniques used by long rubber attackers. Mainly used to return the opponent's attack or forward curveball and other faster incoming balls. At this time, the ball will often sink to a certain extent, and because most of the reaction force of the long rubber passes through the center of the ball, the ball will have a certain sense of shaking when running in the air. The speed of the ball in the first half is very fast, that is, the time for the ball to take off the beat is relatively short, but the speed of running in the second half after crossing the net is relatively slow. When returning this ball, for amateurs, it can be regarded as a general backspin ball. You can hit the ball later, which is good for aiming at the ball. Those with higher level can choose to pull the ball or rub it back according to their tactical intention and the solid degree of basic skills.

(2) the method of hitting back.

Long rubber athletes often use the knocking technique. When they hit back with a loop ball and a small topspin, they use a positive rubber pull. Because this technology is mainly used to deal with the topspin which is not very fast, according to the basic principle of long rubber hitting performance, the return ball at this time is generally very strong, the ball has a small shaking feeling and a slow speed, and the ball will not move forward too much after landing, and the hitting distance in the arc is short. When returning this kind of ball, amateurs are advised to use rubbing balls more. Players with a certain sense of touch can practice lifting the middle and lower part of a contact ball, which is what we often call "holding the ball".

(3) the method of arch return

Arch is a technique used by long rubber players to deal with general backspin, which is aggressive to some extent. This kind of ball generally has the characteristics of topspin. The ball is faster when it is released. At the same time, because of the small friction, there are more components passing through the center of the ball, and the ball has a strong sense of shaking in the air. Pay special attention to the ball when you hit back, you can slow down appropriately, and don't be confused by your opponent's hand speed. The speed of the ball after crossing the net will drop sharply. If you hit the ball forehand or pull it back, be careful not to hold it too much, stop and use moderate force. The backhand position can be hit directly by pushing or backhand dialing. Don't retreat too much in the station, because the second arc distance after the ball lands will not be very long.

(4) Return stroke scraping method

Choppers use long glue to deal with short backspin balls in the table, usually with forehand. In actual combat, the chopper uses this technique the most when catching the forehand short ball. With a certain suddenness, it can be said to be an alternative technology "picked" by rubber players to a certain extent. Because the direction of the force has a certain lateral component, the original rotation direction of the ball has not been fundamentally changed, and the ball that returns to the past shows a certain topspin property and a certain sense of shaking. Give a little strength when you hit back, so that the ball has a certain quality, let the chipper step down, and then use the tactics of pulling or rubbing to deal with the chipping. Otherwise, the chopper will give full play to the power of attacking the ball, change the board and attack continuously, resulting in its own passivity. Amateurs who are not good at basic attack can slow down the hitting speed slightly, attack with a push block or moderate strength, or return with a forehand, but at this time, special attention should be paid to controlling the landing point, and it is best to return to the backhand position or chop the ball.

References:

Great Wall Table Tennis Network