Video tutorial on making cement flowerpot mold

The video tutorial of making cement flowerpot mold is as follows:

1, select the appropriate mold.

You can make a flowerpot model from ordinary cardboard and prepare two cardboard molds with different sizes or shapes for the next step.

Step 2 spray the mold

After choosing the shape and material of the mold, the next step is to spray oil mist lubricant or mineral oil on the mold, which is very necessary and can make your cement flowerpot easier to take out, especially when using glass molds. If there is no lubricant spraying, the mold you make is basically disposable.

Step 3 prepare concrete

After preparing the materials, pour the cement into the flat ground, add water and river sand, and stir properly. Adjust the proportion according to the instructions until it becomes paste, and then put it into a large mold.

4. Decorate cement flowerpots

When making cement flowerpots, various ideas can be added to make cement flowerpots more beautiful and practical. The bottom of the container must be perforated and a large drainage hole must be left. The pot can be decorated with pebbles, glass beads, shells and other materials, and it is good to decorate some geometric patterns.

5, pouring concrete on the mold.

It is not difficult to make a small cement flowerpot. As long as a suitable mold is prepared and a small hole is left at the bottom, it can be dried quickly, but it is more difficult to make a large cement flowerpot, because it takes two days to dry thoroughly.

Step 6 let the flowerpot dry

This is the last step in making cement flowerpots. Let the cement flowerpot dry for at least one day to ensure that the cement flowerpot has strong hardness. When it is completely dry, you can take out the small mold inside. If you use cardboard as a mold, you can peel it off directly, and if you use glass, you can break it directly.

Step 7 grow plants

In fact, the shape of the flowerpot depends on the mold you use, and those with patterns will be more chic.