What's the trick to catch swordfish?

There are two main ways to catch swordfish: drag fishing and pull fishing.

1) for trawling.

Generally, regular special trawlers should be used and equipped with special equipment. The fishing rod should be light and can withstand 80-30 kg of tension. It is best to choose a special fishing rod. It needs to be equipped with a large winding wheel, and the No.40 high-quality nylon thread (about 1mm in diameter) should be wound 300-500m in advance like a bus. The lower end of the bus is connected with the "plane" (that is, the "pigeon") through a large-scale torsion ring, and its function is to make the fishing group float on the water. The lower end of the "airplane" is also connected with a 3-3.5m steel wire sub-line through a torsion ring. At the end of the secondary line, install fake bait or strong hook. This equipment is basically the same as a trawler fishing tuna.

Before fishing, you should first look for or find the trace of swordfish. Swordfish swimming is characterized by dorsal fin and caudal fin often emerging from the water. According to the dynamics of fins, the swimming direction of fish can be judged. At this time, the angler should try to throw the fishing group in front of the swordfish. As long as swordfish finds bait, it will swallow the bait hook with its mouth open and dive into the water in a hurry. In this case, you can let go of the bus and pull it out for about 200 meters, which will slow down the exit of the general bus. At this time, you should suddenly stop and make great efforts. In this way, the frightened swordfish will run wildly again. Anglers should be calm and calm, and make them tired by paying off, winding and walking repeatedly. Generally, in about 3 hours, they can draw closer to the boat and catch it on the boat with the help of fishing AIDS.

2) When fishing.

Special fishing boats must also be used. Swordfish are usually caught by "fishing and cutting". The so-called "fishing and cutting" means that a large bamboo pole with strong tensile force and toughness is stretched out on both sides of the ship, and the length of the bamboo pole should be about 6 meters. At its front end, the bus is tied to the bamboo pole with ropes of different thicknesses, usually three: the front end is thinner, the second one is slightly thicker and the third one is the thickest. General buses are made of strong brown ropes. The sub-wires are also made of steel wires. The end of the bus is tied with a spherical float with a diameter of about 20 cm. Each bus is about 500 meters long and coiled in two baskets.

When fishing, fishing boats equipped with "fishing and cutting" equipment will drive to the fishing ground. When swordfish are found migrating, you can throw the fishing group into the water and wait patiently. When the news of fish comes, the rope that binds the bus bar and the bamboo pole will be broken one by one, which will play a joint role. When the last thread is broken, it will be discharged from the basket. When the outgoing line slows down, you can suddenly pull the car, continue to pull the line after making great efforts, and repeatedly lead the swordfish away, so that the energy of the caught swordfish is exhausted, thus drawing the boat closer and catching it with the help of the fishing aid.

It is worth noting that swordfish is big and fierce, so at the last moment before boarding the boat to fish, it is necessary to aim at its head with a mallet to make it unconscious, and then go ashore to fish. In addition, when the captured swordfish is dragged close to the fishing boat, it sometimes rushes to the string crazily and knocks over or knocks over the fishing boat with a long kiss like a sword, leading to accidents. Take precautions in advance, just in case. Also, if the swordfish you catch is too big, don't pull it hard. Once you find that you can't do anything, you must not be forced. You should make a decisive decision-stop the bus and "lose your car to protect your handsome" to ensure personal safety.