Pruning method of floor tile

When installing the floor, it is an essential job to trim the floor tiles. It can make the floor tile better adapt to the shape and size of the room and make the installation process simpler and more efficient. The following are the common methods of floor tile dressing:

1. Trimming with ceramic tile cutting machine: The cutting machine is a special tool for cutting floor tiles, which can trim the tiles to the required size in a short time. Put the brick on the cutting machine, adjust the angle and depth of the machine, and gently press the pull rod to finish the cutting.

2. Use hand tools for trimming: hand tools include tile cutter, brick clamp, saw, etc. Using these tools requires skilled technology and enough time. First draw the required size on the brick with a pen, and then trim it slowly along the lines with a tool until the brick is completely flat.

3. Trimming with masonry: Masonry is a kind of mud stone or pottery stone, and bricks are trimmed by hand. Put the brick on a flat surface, and slowly polish it with masonry according to the required size until the brick reaches the required size.

The above are the common methods of floor tile pruning. Before trimming, you need to choose the right tools according to the floor tile material. If it is a hard brick, it is recommended to trim it with a cutting machine. If it is soft brick, it can be trimmed with hand tools and masonry. No matter which method you use, you need to be careful to ensure that the floor tiles can be perfectly embedded in the ground after pruning.