Multi-story steel structure plant arrangement?

What is multi-story steel structure plant arrangement? Please see the article edited by Zhongda Consulting.

1, when the plane shape is complicated, the height of each part of the frame differs greatly or the floor loading differs greatly, anti-seismic joints should be set up or other measures should be taken. When set up earthquake-proof seam, the seam width should not be less than 1.5 times the corresponding concrete structure of the house.

2, heavy equipment should be arranged low.

3, when the weight of the equipment is directly borne by the foundation, and the equipment vertically need to pass through the floor, the plant floor should be separated from the equipment. The width of the seam between the equipment and the floor shall not be less than the width of the anti-vibration seam.

4, the equipment on the floor should not be arranged across the anti-seismic joints; when the transportation machine, pipeline and other long equipment must be arranged across the anti-seismic joints, the equipment should have the ability to adapt to the structural deformation during an earthquake or measures to prevent rupture.

5, the working platform structure in the plant and the plant frame structure should be arranged with seismic joints. When connected with the plant structure as a whole, the elevation of the platform structure should be the same as the corresponding floor elevation of the plant frame.

The above is collected and organized by Zhongda Consulting

For more information about engineering/service/procurement bid writing and production, to improve the bidding rate, you can click on the bottom of the official website of the customer service for free consultation:/#/?source=bdzd