Gear deburring method?

This one is also commonly used in general business, using files, sandpaper, grinding head, etc. as auxiliary tools. Files have manual files and pneumatic missteps.

Labor cost is more expensive, efficiency is not very high, and it is difficult to remove complex cross-holes.

The technical requirements for workers are not very high, applicable to small burrs, the product structure is simple products.

2, die deburring

The use of making dies with the punch press for deburring.

Short comment:

This requires a certain amount of production costs for the punch mold (rough + fine punch mold), and may also require the production of shaping molds.

Suitable for products with simple parting surface, better efficiency and deburring effect than manual.

3, grinding deburring

This type of deburring includes vibration, sandblasting, roller, etc., and is currently used by more companies.

Short comment:

There is a problem that the removal is not very clean, may need to follow up with manual treatment of residual burrs or with other ways to deburr.

Suitable for small products with large batch sizes.

4, freezing deburring

The use of cooling to make the burr quickly embrittled, and then spray projectiles to remove the burr.

5, heat explosion deburring

Also known as thermal deburring, explosion deburring. Through some easy gas, through to a device furnace, and then through some media and conditions of the role of the gas explosion, the use of energy generated by the explosion to dissolve the deburring.