Where should the anchor hook lead pendant be installed?

The installation position of the lead pendant is above the hook, but some lead pendants are also installed below the hook. The method is to keep the length of the line 10 ~ 15 cm after hooking. Then clip the lead pendant on the extra wire. The weight of the lead pendant is slightly less than the buoyancy of the float.

In order to prevent the wire from hurting the wire, a hollow thin hose can be used, and the wire passes through the hose and is clamped on the thin hose. Its advantages are as follows:

1, adjust the distance between the lead pendant and the hook according to local conditions.

2. The bait is not easy to be buried by weeds or silt at the bottom of the water.

3. When the lead pendant is stuck at the bottom of the water, you can pull up the hook slightly to make the lead pendant fall off, and then use another pendant to fish.

Extended data

Matching device:

1, fishing rod Generally speaking, the pole is 2-2.4 meters long, hard and elastic, and the net fishing of the pole is more than 2-3 kilograms. Judging from the current commercial poles, sea poles and Lu Ya poles are more suitable.

2. Wire wheel. This kind of spinning wheel can easily rotate the wheel to take up the thread after throwing the pole every time.

3. Line group. The thread length is about 100m, and the thread diameter is generally 0.6 ~1mm. In addition, carry a knife that can be reached with you, and cut the thread when necessary to protect the person and the pole. Each wire group can be equipped with 2-3 anchor hooks, about 25mm between each anchor hook, and the lead wire falls at the front end, about 25mm away from the first hook. Prepare several more groups.

Baidu encyclopedia-anchor hook

Hownet-anchor hook fishing is not advisable