How to distinguish the hardness of fishing rod

Question 1: Is the hardness in fishing rod described by numbers? Carp stems are hard, ultra-hard and extremely hard (anglers also divide them into 1H2H3H4 according to their own experience).

Luo Fei's poles 4h 5h 6h 7h 8h Some poles have 9h 10h on them, which is actually similar to 8h. I guess the producers are fooling around.

However, the number of each attribute is also different in hardness. The same hardness, some write for 4 hours, some write for 5 hours, depending on your own experience.

Question 2: How to distinguish the hardness of fishing rod from the handle at the hand end? You will know when you wave your arm. Please ask someone to help you pull the slightly braided pole (with a fishing line when turning). You lift the fishing rod hard and visually check where it bends. We divide the pole into 10 equal parts, where it bends are several keys, for example, 30% away from the pole, then we call it Sanqi key, and 40% is 46 keys. In addition, we generally call it a hard stick above the key of Sanqi, and a combat stick above the key of 28. Generally speaking, the 46-key is the soft rod, and the one that can be pursed or even softer is called the face rod.

Question 3: How to distinguish the hardness and tonality of fishing rod? Tonality represents the change of fishing rod curve. In fact, it is the hardness of the fishing rod itself, which is determined by the bending angle of the fishing rod after being stressed. According to tonality, fishing rods can be roughly divided into the following five types.

1. Soft adjustment rod: commonly known as "five-five adjustment rod", that is, we divide a fishing rod into 10 equal parts and hold the rod horizontally. When it is slightly stressed, observe its bending: the arc tangent point formed by the bending part of the rod body should be at half of the whole rod body. Form a state in which half (5 equal parts) is bent and the other half (5 equal parts) is straight. The tonality of this fishing rod is called "soft tuning rod" or "five-five tuning rod"

2. Medium-hard rod adjustment: commonly known as "four-six rod adjustment", that is, a fishing rod is divided into 10 equal parts and held horizontally. When it is slightly stressed, observe its bending: the arc tangent point formed by the bending part of the rod body should be near 2/3 of the whole rod body. Form 4 equal bends and 6 equal straights. The tonality of this fishing rod is called "medium-hard tuning rod" or "four-six tuning rod"

3. Hard adjustment rod: commonly known as "Sanqi adjustment rod", that is, a fishing rod is divided into 10 equal parts and held horizontally. When it is slightly stressed, observe its bending: the arc tangent point formed by the bending part of the rod body should be at the position of 2/3 of the whole rod body. Form 3 equal bends and 7 equal straights. The tonality of this fishing rod is called "hard tuning rod" or "Sanqi tuning rod".

4. Ultra-hard tuning rod: commonly known as "28 tuning rod", that is, a fishing rod is divided into 10 equal parts and held horizontally. When it is slightly stressed, observe its bending: the arc tangent point formed by the bending part of the rod body should be about 1/4 of the whole rod body. Form a bend consisting of two equal parts. 8 equal shares of the state. The tonality of this fishing rod is called "super hard tuning rod" or "28 tuning rod".

5. Extremely hard rod adjustment: commonly known as "19 rod adjustment", that is, a fishing rod is divided into 10 equal parts and held horizontally. When it is slightly stressed, observe its bending: the arc tangent point formed by the bending part of the rod body should be at the position of110 of the whole rod body. Form 1 equipartition bending and 9 equipartition normality. The tonality of this fishing rod is called "extremely hard tuning rod" or "one-nine tuning rod"

Question 4: What do you think of the hardness of fishing rod? Just shake your arm and you'll know.

Please ask someone to pull your braid a little (if it turns, pull it with a fishing line). You lift the fishing rod hard and visually check where it bends.

We divide the pole into 10 equal parts, and there are several keys where it bends.

For example, if it is slightly off the pole by 30%, we will call it Sanqi tone, and if it is off by 40%, it will be called 46 tone.

In addition, we usually call it a hard stick above 37 keys and a combat stick above 28 keys. Generally speaking, the soft lever is the four or six keys, which we used to call the face lever.

Question 5: Is the hardness of fishing rod as soft as possible? How to choose the hardness of fishing rod cannot be said that the softer the better. It depends on where you want to fish, but it is generally tonal, so it can be used in various occasions. Shuang Bao fishing rod has a kind of dragon power with moderate tone. Very easy to use, good feel and great strength. I recommend it to you.

Question 6: There has always been a misunderstanding. Is the fishing rod as hard as possible? Personally, I feel that the hardness of fishing rod should be selected according to the actual fishing environment. If you fish in the heavy grass area, you must use a hard pole, because you have to consider that after the fish is hooked, the fish will plunge into the grass regardless, even if the grass is used to pull the fish back, it will also be equipped with a big one-pound line. This is full of confidence, there is no need to choose such a hard one.

The meaning of tonality:

Tonality determines the basic performance of a fishing rod. The tonality of softness, hardness, superhard and superhard distinguishes the different uses of fishing rods. On the other hand, the tonality of fishing rod refers to the category of tonality.

Division of tonality:

Three definitions of tonality:

First, the simple tonality of the hand lever, which was first understood and used up to now, is defined as: soft tone, hard tone (basically 5-5 ~ 4-6 tone), ultra-hard tone (3-7 ~ 1-9 tone range), extremely hard tone (basically shaky without bending tone, including: 1 ~ 8h hardness distinction) and so on.

Second: Japanese names are divided into:

This tone-probably similar to neutral tone;

Trunk key -4-6 key;

Tune first-probably similar to our ultra-hard tuning range;

Combat rod-another name for extremely hard tuning rod; Others said: it refers to the fine products in the pole.

Thirdly, a domestic fishing tackle expert put forward for the first time that the tonality of fishing rod should include: self-weight, fishing force, elasticity, toughness, feel and resilience; Seven terms for comprehensive evaluation of fishing rod performance are put forward: long, thin, light, hard, strong, soft and fixed.

Some factors that affect the tone:

A, hardness,

The hardness of fishing rod determines and affects the tonality of fishing rod! For example, the carp stem is 3-7 or 2-8 times harder than the carp stem. Because of the different wall thickness and hardness, there will be differences in fishing power, elasticity, self-weight, toughness and hand feel. Even between the two kinds of carp poles, there are different understandings and definitions because of the different "hardness" and the different design concepts of manufacturers.

B, elasticity,

In the design and production of fishing rods, it is also very important whether the elastic index is just right! For example, some super-hard carp poles look like 2-8 when shaking, but once the fish is controlled, it will bow to the end, which is a sign of insufficient elasticity! The elastic design of a good fishing rod should reflect the sense of actual combat:-the high-quality connotation that fishing small fish is not hard and fishing big fish is not soft! Moreover, in the process of controlling fish, the rebound force of fishing rod itself can automatically reduce the impulse of fish, saving a lot of manpower!

C, toughness,

Generally speaking, it refers to the bending strength and overall consistency of fishing rod. Good local toughness is not necessarily a good rod! For example, the characteristics of the 3.6-meter carp pole are: 2-8 keys for small fish and 2-8 keys for big fish! As the saying goes, "nodding without bowing" is a fake 2-8 key. The reason for this phenomenon is that the elasticity and hardness of the whole rod are unevenly distributed! Soft before hard. The force transmission between the front section and the back section is inconsistent! The stress of the whole pole is completely concentrated in the front, and the big fish has taken the bait, and has already competed with the fish in the local "toughness" of the first two sections ... The design of toughness, elasticity and hardness is insufficient, which makes the whole pole "tonality" collapse!

Hard fishing rod

First, the hard rod

1, what tonality is a hard bar:

The concept of hard pole has different opinions. But the general hard fishing rod refers to -4-6 adjusting rod. And the hardness index of fishing rod plays a leading role in it, not tonality! For example, the same 5-5 adjusting rod has different hardness and wall thickness, and there are also soft and hard points!

2. Characteristics and performance of hard fishing rod:

The characteristic of a hard fishing rod is that it is straight when it is gently shaken in your hand, unlike a soft fishing rod, it has the feeling of shaking its face! In addition to its own hardness, the designs suitable for fishing are also different. Hardness and elasticity should complement each other. High hardness leads to strong elasticity, and low hardness leads to weak elasticity, which generally leads to this feeling of controlling fish.

3. Scope of application:

There is an old saying: catch big fish with a soft pole (with certain elasticity) and catch small fish with a hard pole. However, at present, the market is full of super-hard fishing rods, and the uses of hard fishing rods are varied, but the application scope of hard fishing rods is very wide! Should be an indisputable fact. That is, it can be used as a comprehensive pole for leisure.

B, superhard fishing rod

1, which tonality does the superhard tuner belong to:

Generally, hold the rod handle and gently shake the fishing rod, and the main bending part appears in the range of 2-8 ~ 3-7 from front to back, which is called super-hard tonal fishing rod.

2. Features and performance:

The characteristic of superhard rod is to change and strengthen the overall hardness distribution of fishing rod, thus strengthening the fishing control and fishing force of fishing rod. Its performance

For, controlling fish is faster and more powerful, and it feels stronger!

3. Scope of application:

In any fast fish fight, the super-hard pole is simpler than the hard and soft pole, whether it is crucian carp or carp ...

Question 7: How to tell the hardness when the long carbon fishing rod is placed flat on your hand? Look at the position of the center of gravity after balance, which are keys 28 and 37. As far away from your hands as possible. It also depends on the hardness of the pole tip. If you hold it in your hand, your head will sink badly. No matter how hard the fishing rod is, it will break. The iron bar is hard, but it is too heavy.

Question 8: The definition of fishing rod hardness in domestic fishing circles, 28 is generally called extremely hard tone, 37 is ultra hard tone, and 46 is hard tone. Extremely hard tuning is suitable for fish flying fast, with fast fish return and good fish control performance. The disadvantage is that it is easy to tangent. Ultra-hard mixing is generally used for polyculture, which is comprehensive and can be eaten by all sizes. Hard tuning is generally used when the speed is slow. The fish returns slowly, and the fish control performance is slightly worse than the above two, but the hard adjustment can bring better hand feeling and better protect the fishing group. Manufacturers have their own set of tonality nominal methods, and there is no unified agreement to stipulate the tonality of poles. When buying, you should choose according to your own usage habits and corresponding occasions.

Question 9: How to tell whether a fishing rod is good or bad? How to distinguish the quality of fishing rod in small yellow croaker net

Although all kinds of fishing rods have their own characteristics, they often have their relative universality in practical use. For example, carp poles can also be used to catch carp, and rock poles can also be used to catch fresh water. When choosing a fishing rod, besides considering factors such as fishing waters, environment, fishing habits and fish species, we should also pay attention to the following points:

1, length: the length of fishing rod is closely related to fishing waters, environment and fish species. When fishing in fresh water, you usually choose a 3.6-5.4-meter-long pole. Fishing rods of 6.3 meters and 7.2 meters can be used for fishing in far fishing spots.

2. Weight: The weight of fishing rod should be light. For example, domestic competitive fishing for crucian carp generally uses a 3.6-meter-long hand pole, and leisure fishing generally uses a 5.4-meter-long pole.

3. Rod body: it should be straight, the wall of the rod should be uniform, the thickness should be uniform, and there is no hard injury or crack.

4, interface interface wall thickness should be consistent, the interface section should be smooth, after plugging each section must be closely connected with the socket, pole interface can't be too shallow or too deep.

5. Uniformity of tonality: After the fishing rod is forced to bend, the curvature of a good fishing rod is in a state of gentle transition, and it can be restored to its original state after removing heavy objects. An inferior fishing rod has a dead angle in its radian, and it can't be recovered after removing heavy objects.

6. Hardness: It can be divided into light tone, medium tone and hard tone. The hardness of fishing rod can be tested according to the practical standard weight. When choosing a fishing rod, use the prepared weights or temporary plastic bags to load the bait with weight, tie it to the tip of the rod, and then slowly lift the fishing rod, so that when the counterweight leaves the ground, the tip of the rod and the bottom of the rod handle remain in a horizontal line. At this time, we can check whether the hardness of the fishing rod is consistent with the hardness marked on the fishing rod according to the curvature of the fishing rod.

Question 10: The harder the tonality of the fishing rod, the better the waist strength? Seek auspicious solution and forward a good post about tonality and hardness of fishing rod! (turning)

Here, first of all, I want to quantify several important concepts that will be involved in this article for the reference of the uninformed fishermen:

The so-called tonality generally refers to the bending point of the principal stress of a rod, that is, the "three-seven-tone" and "five-five-tone" which are often said, and have nothing to do with the overall hardness of the rod, but two things. Friends who are new to fishing tackle often confuse tonality and hardness. Quote the following figure to illustrate the difference between hardness and tonality.

The so-called hardness refers to the overall bending capacity of a pole, which has nothing to do with the "Sanqi Tone" and "Wuwu Tone".

The so-called waist force refers to the rebound force of a rod after bending, that is, the force issued after bending to restore the original straight state.

The so-called strength refers to the bending ability of a pole. The higher the strength, the less likely it is to break. It has nothing to do with the "hardness" of the fishing rod, but can be said to be influenced by "tonality".

The more the tonality of two fishing rods with the same hardness tends to be "adjusted first", the easier it is to break.

The main attributes of a pole are usually the above four items. Some friends will say that the important attributes of a pole are not length, weight, priority, element diameter, tonnage of carbon fiber cloth and so on. Those are just surface parameters. In fact, the above four items are the specific performance data of a pole obtained after analyzing these parameters. For example, the tonnage of carbon fiber cloth refers to the material, and the element diameter refers to the diameter and taper of the rod body. By referring to the diameter of the rod, we can get the approximate wall thickness or wall thickness. According to these factors, we can finally analyze the tonality, hardness, resilience and strength of a pole.

Only the following aspects affect the performance of fishing rod: material, diameter, taper and wall thickness. Of course, the length is also very important, but when we compare two or more fishing rods, we must first make sure that their lengths are the same to be comparable, so we will not consider the length for the time being.

First of all, talk about tonality, which is the most concerned and discussed topic. In fact, as a concept, it is very simple. It just refers to where the fish in a pole will bend in the future. The so-called "first tune", "original tune" and "trunk tune" are nothing more than explaining that the main stress point of the pole is near the tip, body or handle of the pole. The main factor affecting this performance of fishing rod is the taper of rod body, which has nothing to do with the tensile strength of carbon fiber cloth itself, because generally speaking, the materials used in a fishing rod are usually consistent, that is to say, there is no difference between the materials before and after. It has nothing to do with the wall thickness, or even with the overall thickness of the fishing rod, but only with the taper, that is, the ratio of the outer diameters of the front and rear rods. We know that fishing rods are usually thinner at the front end and thicker at the back end (similar to Yamato fishing rods, the rod tip is not necessarily thinner than the handle). Careful fishermen have the opportunity to observe, for example, the fishing rod near the handle is not the thickest, but slightly thinner than the first half, or has no taper at all, similar to the "carbon tube", but in general it is still a "carbon tube".

Quote: Take ghost fighters and Xuanwu people as examples. The longer the ghost fighter is, the softer it is, but the more points it bears. The foot hardness of Ghost Warrior 8~ 1 1 is even slightly higher than that of Xuanwu people, while the foot hardness of Ghost Warrior 12~ 15 is lower than that of Xuanwu people, and the stress points are similar, all of which are partial. The hardness of Ghost Warrior 16~ 18 is the tuning lever, but it is the same. Another example: Xuanwu people are harder than fire, that is, they are not easy to bend. However, although the hardness of the fire is not outstanding, the tonality is adjusted first, which means that its basic bending point is relatively high, as the saying goes, "quite". If we can really understand this "tonality diagram" of major manufacturers, we can really understand and distinguish the difference between "hardness" and "tonality".

Then the fishing rod has another important attribute: hardness. The factors affecting the hardness of fishing rod are related to the material, namely the tensile strength of carbon fiber cloth itself and the overall diameter of fishing rod. It can be said that the hardness of fishing rod with higher carbon fiber cloth grade and larger diameter will be relatively high, while the hardness of fishing rod with lower carbon fiber cloth grade and smaller diameter will be relatively low. (Although there are high and low levels of carbon fiber cloth, this statement is not exact, but the tensile strength of carbon fiber cloth. Carbon fiber cloth is not artificially graded, because the higher the tonnage of carbon fiber cloth, the better the fishing rod.

It's simple to introduce another concept here, but I really haven't thought about it, hehe. Namely: equal weight ... >>