How to embroider velvet insoles?

For shearing insoles, the velvet knife should be quite fast. If the knife is not cut fast, it will be uneven.

Hand-made method: Cut velvet insole is a kind of hand-made. Put a pair of glued insoles together, draw the same pattern on both sides, and change the thread according to the color of the pattern and the picture for fine sewing. After sewing, use a sharp knife to separate from the middle.

What is a velvet insole? How is it made?

Hand-made method: Cut velvet insole is a kind of hand-made. Put a pair of glued insoles together, draw the same pattern on both sides, and change the thread according to the color of the pattern and the picture for fine sewing. After sewing, use a sharp knife to separate it from the middle, and the thread hairs on both sides are like velvet. If you want to make the fluff longer, you can add some other cloth in the middle and cut it to make it longer. This is an ancient practice, and now there are many machines that can make a similar process.

Manufacturing method of velvet-cut insole

Hand-made method: Cut velvet insole is a kind of hand-made. Put a pair of glued insoles together, draw the same pattern on both sides, and change the thread according to the color of the pattern and the picture for fine sewing. After sewing, use a sharp knife to separate it from the middle, and the thread hairs on both sides are like velvet. If you want to make the fluff longer, you can add some other cloth in the middle and cut it to make it longer. This is an ancient practice, and now there are many machines that can make a similar process. Details: put the insoles of the left and right feet together, draw a pattern on one foot, sew it on, and the sewn back is on it, which is what it looks like. Cashmere acrylic thread is used for embroidery. This is what it looks like after sewing and cutting two insoles with a sharp knife. The cut velvet insole is full of flowers and feels full. Acrylic yarn just doesn't absorb sweat. The production technology of velvet insole in Yimeng Mountain area: the needle is an ordinary No.2 sewing needle, and the thread is also an ordinary embroidery thread, but you have to make it into four strands after you buy it. You also need a thimble. This is another main tool, which is gauze. Ordinary gauze bought from the market is always folded into twenty layers, ten layers on both sides and two layers in the middle. The gauze is padded with two layers of cloth in the middle, and it is best to have different colors, because it needs to be cut from the middle after receiving it. Then, close the gauze and put two pairs of insoles on both sides. This insole is made by ourselves. Embroidered insoles are embroidered with fine bulked yarns, with large stitches and quick embroidery.

Is cross-stitch insole better or cut velvet insole?

Of course, pure cotton will do.

Softness and sweating

What is the upper and lower needling method of velvet insole? I can't see the online video clearly. Please help me embroider. Thanks for 20 points.

The whole process of making velvet embroidered shoes video:

56/u96/v_ODgzNjIyMTQ

Design method of cut velvet insole

The insole is the bottom part placed on the insole of a shoe. Its function is to make the insole clean perfectly, eliminate foot sweat and moisture absorption, and make the insole smooth and comfortable to wear. Insoles are divided into full insoles, half insoles, heel pads and sandal pads. The design of the insole is based on the insole sample, which is made by properly expanding and contracting each part of the insole sample. 1. The whole insole is attached to the shoe, and the insole is synthesized by sewing technology. Its length accounts for 98% of the length of the insole, the heel is basically unchanged, the front end is 3-4mm, the inside of the lumbar fossa is 2mm larger than the insole sample, and the outside is 1.7mm larger than the insole sample. Then connect the arcs of each point and cut them according to the line. 2. The half insole is located in the lumbar fossa, and its length accounts for about 66% of the sample length of the insole, and other expansion and contraction ratios are similar to those of the whole insole. Semi-insoles are generally used for adhesive shoes with leather shoes pads, which are beautiful and can save raw materials. 3. Heel pads are generally used on leather and smooth insoles, and their length accounts for about 29% of the length of insoles. The heel pad can be overlapped with the insole sample without expansion and contraction. There are many styles of sandal mats, including full waist, full heels, full heels and full heels. Due to different styles, sandal pads are also different.

How to make embroidered insoles

Linyi Naxiu cut velvet insole

"Naxiu cut velvet" insole is a folk handicraft in Linyi area. It is said that this embroidery method is a kind of Shu embroidery, which originated in Meng Lianggu at the junction of Mengyin County and yinan county, Linyi, and is widely circulated in Linyi. Na embroidery, also known as "needle embroidery", is consistent with the embroidery method of Na sole, that is, from one side of insole to the other, the stitches are not oblique or crooked, and both sides are consistent. The so-called velvet cutting is to cut the embroidered insole from the middle with a sharp knife to get two completely symmetrical insoles with the same color but different directions. The cut cotton thread naturally forms "velvet" Because the production process includes wiring embroidery, splitting and opening, it is named "embroidery scissors".

The manufacturing process of Naxiu velvet-cut insole is complicated, and its working procedures are roughly as follows:

First, the preparation before embroidery

1. Punching:

First, use white flour to make paste. The specific method is: put a bowl of water in the pot, then put some noodles in the pot, put them on the fire to boil, and let them cool for later use. Punching is to glue the remaining pieces of cloth together to make a whole piece of cloth. In the process of bonding, it should be placed flat on the table to ensure smoothness. Don't expose stamps to the sun, be sure to dry them, so they won't wrinkle easily. After the seal is dried, cut the sole sample directly according to the shoe size.

2. Making base fabric:

Generally, after the sole sample is made with a seal, the base cloth should be made according to its size. Base cloth, that is, a single layer cloth with 2-3 layers on the sole sample, is designed for warmth and comfort.

3, looking for interlining:

Interlining, that is, the cloth that wraps the bottom sample and the bottom cloth. There are no restrictions on the material and color of the interlining, as long as it can be wrapped. But most of them will use the same color cloth, mostly white or red.

4. Prepare tools:

Everyone who embroiders insoles always has his own needle and thread in front of him. It is filled with needles, threads, needles, scissors, knives, needle cones, thimbles, chalk, ballpoint pens, copy paper, various types of needles, shoe flowers and so on. These are all necessary tools for embroidered insoles.

5, looking for shoes:

This is the engineering drawing of embroidered insole. Shoe flowers, commonly known as "shoe patterns", are mostly handed down from the older generation. Everyone takes what they need and learns from each other. Only a few smart people can make their own shoes.

6. Prepare gauze:

Prepare gauze piece, the length of which is greater than that of insole, which is the auxiliary material of embroidered insole. In the past, sacks were used to hold grain. Because the sack is thick and dense, it is laborious and laborious to embroider, so the gauze is changed.

Second, the production process

1. Wrap the sole sample and the base cloth with the interlining, then draw out the edge with a fine needle thread, and press the irregular edge of the interlining to the bottom, and the bottom pad of a pair of shoe pads will be baked. The color of the thread used for wrapping should be the same as that of the interlining, so that it looks flat and clean.

2. Use a ballpoint pen to copy the shoes with copy paper to the bottom pad wrapped with interlining. In the process of copying, dot matrix printing is used, that is, intermittent points are pointed out with the pen tip to describe the sample spectrum. The advantage of dot matrix printing is that if there are mistakes, they can be corrected easily without any big traces of modification.

There are many kinds of shoes and flowers. Animals include dragons, phoenixes, magpies, goldfish, butterflies, cats, horses, cranes, chickens, tigers, penguins, ducks and mandarin ducks. Chinese characters: Xi, happiness, blessing, meeting in 2008, fate, century-old harmony, longevity, etc. Plants: gourd, peach, pomegranate, peony, chrysanthemum, lily, morning glory, rose, calla lily, plum blossom, tulip, etc. No matter what kind of shoes, it is mainly for good luck. For example, magpie's visit to plum indicates the coming of happy events; Red leaves convey feelings and indicate the girl's love; Phoenix plays peony, which means auspiciousness; Embroidering a powerful tiger means that the person who uses it is as powerful, brave, bold and regal as the tiger.

Generally, there is no single pattern in the shape of shoe flowers. It consists of two parts, one is the main mode and the other is the auxiliary mode. For example, if the main pattern is duckling, more flowers and plants will be embroidered in the blank to enrich the upper. The small pattern of this fitting needle properly fills the blank of the mat surface and makes the mat surface full and substantial.

3. Fix the wrapped two bottom pads on two groups of gauze sheets with the same thickness with several stitches with large span. After fixing, fix them back to back with thread. The thickness of gauze determines the thickness of insole fluff. Usually three or four pieces of gauze are used. The thickness of each insole and gauze piece must be the same. Different thickness, the cut fluff will be uneven.

4. Hand embroidery.

(1) edge wrapping, that is, two circles of iron wire are wound around the edge of the bottom pad. For the sake of beauty, the color of the lines should be ... >>

Introduction of velvet insole

Cut velvet embroidery is a traditional handmade insole in China, which is produced in the famous old Yimeng area and the famous Meng Lianggu Battle Site. Cutting insoles is a purely manual technology that cannot be replaced by machines. A pair of cut insoles are made by hand, and it takes 7 to 10 days to complete (calculated by the workload of 10 hours per person per day).

Can 2mm thread be used to embroider velvet insoles?

Series 20 is also acceptable. The common thread of insole is polyester high strength thread.

Hand-cut velvet insole exercise

Hand-made method Hand-made method: Cut velvet insole is a kind of hand-made. Put a pair of glued insoles together, draw the same pattern on both sides, and change the thread according to the color of the pattern and the picture for fine sewing. After sewing, use a sharp knife to separate it from the middle, and the thread hairs on both sides are like velvet. If you want to make the fluff longer, you can add some other cloth in the middle and cut it to make it longer. This is an ancient practice, and now there are many machines that can make a similar process. Details: put the insoles of the left and right feet together, draw a pattern on one foot, sew it on, and the sewn back is on it, which is what it looks like. Cashmere acrylic thread is used for embroidery. This is what it looks like after sewing and cutting two insoles with a sharp knife. The cut velvet insole is full of flowers and feels full. Acrylic yarn just doesn't absorb sweat. The production technology of velvet insole in Yimeng Mountain area: the needle is the ordinary No.2 sewing needle, and the thread is also the ordinary embroidery thread, but you should make it into four strands after you buy it. You also need a thimble. This is another main tool, which is gauze. Ordinary gauze bought from the market is always folded into twenty layers, ten layers on both sides and two layers in the middle. The gauze is padded with two layers of cloth in the middle, and it is best to have different colors, because it needs to be cut from the middle after receiving it. Then, close the gauze and put two pairs of insoles on both sides. This insole is made by ourselves. Embroidered insoles are embroidered with fine bulked yarns, with large stitches and quick embroidery.