Video tutorial on how to connect a five-hole socket

The five-hole socket wiring video tutorial is as follows: How to wire the five-hole socket video tutorial

Peel off the skin of a section of wire, find the L terminal, loosen the screw of the terminal and connect the live wire to the L terminal. Find the E terminal, loosen the screw on the post and connect it to the E terminal. Find the N terminal, loosen the screw on the terminal and connect the zero line to the N terminal. Give it a gentle pull when it is connected.

There are usually two ways to connect the five-hole switch socket: the first way is to connect the switch control socket; Second, the plug-and-play switch of the socket controls the load, such as lighting and other connection methods. The live wire of the circuit is inserted into any jack of the terminal in the switch area, the neutral wire is inserted into N hole, and the ground wire is inserted into the ground wire hole.

The five-hole socket has been connected, just connect the corresponding power supply. There are five terminals on the back of the socket, which are marked with L, N, E, L 1, L1,L 12, that is, L-live wire, N-neutral wire and E-ground wire. In addition, due to the different purposes of the socket, its connection mode will be different.

When the socket power switch is turned on, the switch is turned on (that is, when the switch is turned off, the socket is turned on). L is connected to L 1 (or the same color as the live wire), the live wire is connected to L 1 1 (without L 12), the neutral wire is connected to N, and the ground wire is connected to E. The switch is independent and controlled by itself (that is, the switch control). Connect L 1 to L (or use the same color as live wire), live wire with L 1 or L, neutral wire with N, ground wire with E, anode of equipment (such as electric lamp) with L 1 1 (without L 12), and cathode with zero wire (N