Teaching solution of slit in the middle of skirt

The graphic picture of the middle slit sewing process of the skirt is as follows:

Preparation materials: scissors, cloth cut according to patterns, needle and thread.

1. Sew the front and back of the coat together.

2. Then sew the shoulders of the front piece and the back piece together.

3. Fold the sleeve in half and sew it on.

4. Prepare the neckline patch and sew the neckline patch with the neckline of the garment.

Now sew the skirt on the coat hem, sew a thread on the skirt piece first, and put it away as big as the coat hem. And aligned and stitched together.

6. Then sew a zipper at the back.

7. Replace the presser foot with an invisible zipper, and sew the zipper on the fabric so that the zipper teeth are as close as possible to the stitching. At the end of the zipper, sew it slowly.

8. Then repeat the same seam on the other zipper, so that an invisible zipper is completed.

9. Such clothes have been made.

Requirements for sewing finished garments:

1, sewing brand quality requirements.

In the process of sewing, all layers of materials or patches must be carefully sewn to ensure the quality. Seam and back seam should be neat, meticulous and neat, and there should be no spiral, dislocation and silk screen printing. Moreover, the sewing thread should be tortuous and reasonable, and the sewn thread can last for a long time.

2. Requirements for the integrity of sewn products.

After sewing, the number of fabrics should be complete, and there should be no incomplete fragments or overlapping strength. Patches and fabrics should be integrated without tension and wrinkles, and the integrity of patches and patterns should be firm.

3. Requirements for the surface effect of sewn products.

Must be careful and meticulous, soft stitches, the whole sewing and joint parts are tight, the surface is complete without wrinkles and broken lines, and the garment surface is clean without ripples and adhesion.

4. The overall shape requirements of the patched products.

The overall shape is natural and comfortable to wear. Ironing should make it more perfect, comfortable to wear, and the overall surface appearance after ironing is natural.

Matters needing attention in sewing clothes:

1, pay attention to ironing.

Wash the stains off the clothes before ironing, and choose the right iron when ironing. When ironing at different temperatures, the handle should be as vertical as possible, which can effectively protect the surface of the clothes.

When ironing with a fan, adjust the tuyere to a low level and the temperature to a minimum, and try to clamp the surface of the clothes with the iron center. Excessive ironing or long-term ironing may cause the surface of clothes to relax or deform, as well as hot stamping.

2. Pay attention to the adjustment of quantitative hem.

When quantifying, press the block to be quantified and pile the rest to one side. After quantification, clean the remaining materials separately, clamp the corners of the material piece to be quantified with pliers (no cracks), and tear it in turn after completion.

After the debris is completely removed quantitatively, it is positioned and the appropriate width is selected when sewing. Be careful not to pull the clothes when adjusting to avoid wrinkling.

3. Pay attention to seam cutting.

Before sewing, it is necessary to carefully analyze the cutting pattern to understand the overlapping strength between cutting materials so as not to hurt the garment surface. Skillfully operate according to different sewing methods, try to sew with appropriate sewing clips, with small bite force and sensitive adjustment, adjust the overlap force between different cutting materials, and evenly pull the thread when sewing, so as not to cause thread breakage.