How to seal the window against the wind

The method of sealing the window is as follows:

When the window can be opened and closed at will, you can open the window, seal the edge of the window frame with foam, and then close the window, so that the thickness of foam can plug the gap.

If the window is not opened or closed, there will be a gap between the glass and the window frame, resulting in air leakage. Only use glass glue to smear along the edge of the glass to block the gap. People used to use putty, but now glass glue is more convenient.

If there is no suitable material to block the gap, you can also paste it with a wide transparent adhesive. Transparent glue has no heat insulation effect, but it can prevent the wind from blowing in and has certain effect, but it is more troublesome to clean up after use.

Make a frame with thin strips of wood according to the size of the window, and then cover it with a whole plastic sheet. You can add some plastic pieces supported by bows and fix them on the window frame, thus forming a closed thermal insulation layer, which can effectively prevent wind and keep warm, but the appearance effect is poor, which is a more traditional way of sticking windows.

The reasons for poor sealing of windows are as follows:

1, material problem.

2. Installation problems.

The air leakage treatment method is as follows:

1. Install sealing strip.

2. Contact the manufacturer to solve or consider replacing it with a new one.

Solutions to air leakage in windows;

Observe the causes of air leakage in windows. If the window gap is too big, you can fill the gap with sealant, so that air can't get in.