How to wire one switch and one light bulb

The wiring method of one switch controlling one light bulb is relatively simple. Many electrician enthusiasts will do the wiring themselves and connect the switch and the light bulb. So how should one switch control one light bulb be wired? I will give you a simple wiring diagram.

introduce.

1. According to experts from Qijia.com, you can first turn off the air switch in your home, lead a live wire and a neutral wire from the lower end of the air switch, peel off part of the protective cover on one end of the live wire and the neutral wire, and connect one end of the switch to the live wire; light

Just connect one end to the live wire and the switch, and the other end to the neutral wire of the power supply.

2. In addition to one switch controlling one lamp, when doing indoor wiring, we often use single-connection dual control, that is, two switches control one lamp at the same time; double-connection dual control, that is, two switches control two lamps at the same time.

Lamps; triple dual control, that is, two switches control three lights at the same time and other wiring methods.

3. When planning the indoor wiring layout, we must consider the total number of home appliances and the number of home appliances that need to be added later, and reasonably plan the number of switches, sockets, and circuit loops according to the home appliances used.

Under normal circumstances, all indoor lighting can be on one circuit; kitchens and bathrooms should be on a separate circuit; high-power appliances such as air conditioners and refrigerators also need to be on a separate circuit.

4. Electric wires are usually hidden in the wall. We need to cover the wires with insulating tubes. Strong electricity and weak electricity cannot be worn in the same wire tube, and there cannot be joints in the wire tube; strong and weak electricity usually need to be kept apart.

If there is a distance of 30-50cm, even if handover is necessary, the handover needs to be wrapped with tin foil.

Strong electrical wires in the kitchen and bathroom should be routed along the walls.

Editor's summary: Regarding how to wire a switch and a light bulb, the editor will briefly introduce it to you here.

I hope that after reading this article, everyone can understand this.

When wiring, the wires should be laid horizontally and vertically and constructed in accordance with standards.