How to disassemble the washing machine chassis?

How to disassemble the washing machine chassis?

Remove the washing machine chassis according to the following steps:

1, cut off the power supply:

Make sure that the power supply is completely cut off before removing any electrical components. This can ensure your safety and prevent the circuit from being damaged during operation.

2. Remove the chassis fixing screws:

On the chassis of the washing machine, you can find several screws to fix the chassis to the washing machine. Use a suitable screwdriver or wrench to loosen and remove these screws one by one.

3. Remove the chassis:

Once the fixing screws are loosened and removed, the chassis can be carefully removed from the washing machine. Be careful not to use too much force to avoid damaging the washing machine or chassis.

4, cleaning and inspection:

After removing the chassis from the washing machine, you can clean the dust and sundries on the chassis with a dry cloth or brush. At the same time, check the chassis for damaged or worn parts and replace them if necessary.

5. Reinstall:

Reinstall the cleaned and inspected chassis to the washing machine, and ensure that all fixing screws are tightened correctly.

6. Trial operation:

After reinstallation, turn on the washing machine and run the test to make sure everything is normal.