1.5cm line lamp installation method

First, make preparations, then slot, and finally install linear lights according to the slot position.

The specific steps are as follows:

1, when we install the linear lights, we should first check the linear lights, such as checking whether there is any bump damage on the surface of the lamps. You'd better connect the lamp to the power supply and check whether it works properly. Before installation, we need to prepare the corresponding installation tools.

2. The installation of the line lamp needs to be connected with the power cord. Therefore, before installing lamps and lanterns, you should first pull down the main switch valve at home and operate it in a power-off environment to avoid electric shock accidents.

3. We must first determine the installation position of the line lamp, then put the lamp trough in the pre-installation position and mark the size range of the trough with a marker. Generally, the length of slotting is slightly longer than that of line lamp, with a depth of 1cm and a width of1.5cm. Then, the gypsum board is slotted with tools such as cutting machine. You must not shake when slotting, so as not to cut the groove askew. After the ceiling is slotted, we need to clean the card slot.

4. When installing the linear lamp, we can cut the lamp groove of the linear lamp according to the shape of the groove, for example, the lamp groove at the corner of the notch should be cut at a 45-degree angle. Then we put the cut lamp trough into the gypsum board trough and fix it with nails.

5. Next, we will stick the LED strip on the lamp trough and cover the lamp shade on the lamp trough.

6. Next, we connect the driving line and power line of the linear lamp together, and then connect the linear lamp line to the driving line connection port.

7. Finally, we put grid cloth on the scales on both sides of the lamp trough and cover them with putty.