How to hang earthworms on rope hooks

(1), head penetration method: directly penetrate from the head, wrap the hook, pass through the hook handle, and hang the excess part outside the hook tip;

(2) Transverse puncture method: puncture the earthworm at a distance of about 1cm from the head of the earthworm, then puncture the earthworm at the same distance, and hang the excess part on the hook tip to expose.

2. Hooking method

A longer earthworm can pick up its head, leave the earthworm body twice the length of the hook, and then cross the cross section, and the excess part is hung outside the hook tip, so that the end can crawl all the time.

3, subsection hook method

Extra-long (relative to the hook) earthworm can be pinched into two ends, and each cut earthworm can be slightly longer than the hook. The first hook tip should be inserted from the head, so as not to expose the hook tip. The remaining fragments should be inserted from the cross section, and the earthworm tail should be hung outside the hook tip. The best effect is to cut the tail of the earthworm; This method is suitable for fishing small fish and slippery fish.

Pack the whole earthworm. There are two installation methods: ① Pierce from the head, wrap around the hook body, and hang the excess part outside the hook tip; (2) Pierce at a distance of about 10 mm from the head, then pierce at an interval of 10 mm, and hang the earthworm tail on the hook.