How to connect the stereo with the TV?

1. Two-to-two double lotus connector connection: Insert the left and right channels at one end of the audio connector into the audio output interface of the TV, and at the same time insert the two plugs at the other end of the audio cable into the audio input interface of the speaker.

2. Coaxial cable connection mode: Insert the coaxial cable into the coaxial interface of the TV and the coaxial interface of the audio, and then output the audio to the audio.

3. Connect the audio through the headphone output port: insert the headphone cable into the TV headphone jack and the audio headphone jack respectively. If the stereo has no headphone jack, you can use RCA cable to connect it in two, one is headphone plug and the other is RCA plug.

1. Check whether there is a power jack and two audio jacks on the TCL TV stereo.

2. Plug the jack cable of TCL TV audio tightly to prevent it from falling off.

3、? The color of the audio jack on the main unit is indicated by the arrow.

4, corresponding to the good color, insert the audio cable into the host jack.

5. After all plugs are plugged in, connect the power plug of the stereo to the power supply. It's done.