How to get down the no-punch pot lid rack

Summary: Kitchen space is usually smaller, with wall-mounted pot rack more space-saving, wall-mounted pot rack on the market according to the different ways of installation, there are two kinds of perforation installation and no-perforation installation, from the solidity aspect, the no-perforation installation to be a little bit lost, but the actual use of the actual use of the pot is not too much of a problem, but better aesthetics, so the no-perforation installation has become the mainstream of the wall-mounted pot rack. If you want to remove a no-punch pot rack after installing it, you can use a hair dryer to soften the no-punch adhesive and then cut it down with a hobby knife. Here's a look at how to remove the no-punch pot lid rack. A pot lid rack perforated or not perforated good

Kitchen put a pot lid rack can be convenient to place the pot lid on hand, in order to save space, a lot of families pot lid rack are wall-mounted, hanging on the wall is better, wall-mounted pot lid rack perforated and hole-free two kinds, then which is better? No punch pot lid rack solid?

1, from the solidity point of view, free of perforated pot rack is the use of free glue fixed on the wall, free of adhesive is a kind of adhesive strength is very strong multi-functional construction structure of strong adhesive, its raw materials are synthesized by the resin, and can be bonded with any material, and in the dry solid after the fixing strength of the nail can be compared with the iron nail; although it may be more than the firmness of the installation of the perforation to be a little worse, but simply put a pot lid. Although it may not be as strong as the perforated installation, it can withstand a simple pot lid.

2, from the aesthetic point of view, the perforated pot rack needs to be punched in the wall, the damage to the wall and the degree of beauty is far less than the no-perforation pot rack.

Because of the no-hole pot rack is more beautiful, and the degree of solidity is basically not lose the installation of the hole, so the mainstream pot rack on the market are basically no-hole.

Second, no punch pot lid rack how to get down

Installed no punch pot lid rack, if you use for a period of time feel inconvenient, or the location of the installation is not good, you can remove and then re-installed, then how to remove the no punch pot lid rack?

1, first of all, remove the lid from the lid rack, make sure there is nothing on it.

2, then energize the hair dryer, set it to high grade, and use hot air to blow at the adhesive of the no-punch glue to soften it.

3, after blowing for a period of time, wait until the softening of some, with a hobby knife on the nail-free adhesive cutting process.

4, then you can take down the whole pot lid shelf, take down, the wall of the residual nail-free adhesive blowing hot and then scraped, restore the wall, and then find a place to install the pot lid shelf can be.