How to choose the lead consumption of floats? How to choose the lead consumption of floats?

1. Selection criteria of lead consumption: correct lead consumption = (number of main lines+water depth) /2. For example, if you use the main line of 1.0 and the water depth is 2m, then (1+2)/2= 1.5, you can directly choose to eat lead.

Whether it is table fishing or traditional fishing, our online group is actually divided into three parts after being thrown into the water. The first part is the section from the pole to the floating seat, which is generally called the wind line because it is easily affected by the wind. The second part is the distance from the floating seat to the lead seat, which is called the waterline. The third part is the distance from the lead seat to the hook. The following is the real substring when fishing. When we fish, if we want the float to come out accurately and quickly, we must press the wind line into the water. The status of the secondary line is not very important. The most important thing is that the waterline must be important, that is to say, the distance from lead base to floating base must always be tight.

3. If your waterline is not tight, the problem is that when the fish bites the hook, the tension of the auxiliary line pulls the waterline, but because of the bending, if the fish's mouth is light, then this tension may be offset, and you can't see any movement at all. And what is the important factor that determines the tightness of waterline? That's how much lead your float ate, the number of wires, the depth of water and the weight of lead skin.