How to do the generator?

1. Dismantle the motor on the toy, being careful not to break two wires, and then make the transmission mechanism fixing bracket as needed, measure and punch holes. Manufacturing a rocker arm at the end of the transmission mechanism;

2. Remove the head of the flashlight, keep the light on, then fix the motor and transmission mechanism on the prepared bracket, and connect the red and black wires of the electric lamp head to the red and black wires of the motor.

The correct use and maintenance of generator set can prolong the service life of generator set;

1, computer room operators should abide by the safety operation procedures, wear work clothes and insulating shoes, and the crew should have a clear division of labor;

2, check the flywheel and generator part of the railing cover are in good condition;

3. Check the gearbox, clutch, governor, oil level and fasteners. Confirm that it is in good condition and the oil-water temperature is not lower than 20 degrees before starting;

4. Set the pipeline gate of each system in the "working" position;

5. Check the connecting bolts of the transmission mechanism and tighten them;

6. Check whether the clutch handle pressure is normal and whether the overspeed safety device is in place.