Q: What is the most powerful blow of 2D table tennis?

To play curveball, you usually use the lower stroke and the lower stroke angle. Here, two terms are explained first, namely the angle between the lower pole and the lower pole.

1) lower pole: that is, lower left pole or lower right pole.

2) Understroke angle: it is the angle that everyone uses to fight. Usually our default cue is parallel to the table, and the default is zero. The thing to adjust the green arc on the right side of the hitting point in the game is to adjust the hitting angle, which can be adjusted to 85 degrees at most. If the ball is adjusted to 85 degrees, it is equivalent to standing the club and hitting a hard white ball at an angle of 85 degrees with the table. The greater the angle of the lower bar, the less the same force acts on the ball. If you adjust the angle of the lower bar to 85 degrees, you can hit the white ball with all your strength, and you can probably walk five or six balls.

Second, the direction of the arc ball arc

If we need to make an arc in the left-hand bending direction (counterclockwise arc), we need to use the lower right bar. Similarly, if you want to make an arc in the right hand bending direction (an arc rotating clockwise), you need to use the left low stick. In other words, the direction of the arc is opposite to that of the low bar.

Third, the size of the arc line ball arc

Generally speaking, the size of the arc is related to three factors: intensity, the angle of the lower pole deviation and the angle of the lower pole. The relationship between these three factors and arc is as follows:

1) The greater the force, the smaller the arc bending.

2) The deflection angle of the low bar deviates from vertical to horizontal, and the greater the deflection, the smaller the arc bending.

3) The greater the angle of the lower rod, the greater the arc bending.

Fourth, the aiming method of curve ball

The aiming method of curve ball generally adopts the aiming method of isosceles triangle, that is, taking the target ball and the white ball as the two points at the bottom, and then determining a vertex with the aiming ball, these three balls form the shape of isosceles triangle. The height between the vertex and the bottom depends on the size of the arc and needs to be realized in practice, generally within the distance of four balls.

For example, to make an arc with such a long distance from the upper left pocket to the upper right pocket, you can consider the following parameters:

1. Strength: Full strength can be considered.

2, low pole angle: left low pole, about 45 degrees, because the right hand is bent.

3. Lower lever angle: 40 degrees.

4. Vertex position: After the three factors mentioned above are determined, you need to find a vertex, which is probably the middle part of the above tundish and the extension line of the five-point ball.