The easiest bamboo weaving tutorial

The easiest bamboo weaving tutorial is as follows:

One pick one weaving method: first arrange the gimlets vertically, then take the gimlets in 1/1 weaving method, horizontal one up and one down through the vertical rows of gimlets, as shown in the figure 1 below. This can also be evolved into a 4/4 weave, as shown in Figure 2 below. It can also be a 1/2 weave, as shown in Figure 3 below. Or 3/3, 2/2, 2/3 and so on.

The knitting process can be roughly divided into three processes: starting, knitting, and locking. In the weaving process, the warp and weft weaving method is mainly. On the basis of warp and weft weaving, can also be interspersed with a variety of techniques, such as: sparse knitting, insertion, wear, cut, lock, nail, tie, set, etc., so that the pattern pattern varies.

The need to match other colors of the products with dyed bamboo or bamboo wire inserted into each other twisted to form a variety of contrasting colors, bright and vivid patterns.

The bamboo material used in the bamboo weaving process is strictly selected from the Chengdu region of the special long knotless bamboo, after breaking the bamboo, baking color, knots, layering, coloring, scraping, scratching, drawing and so on more than a dozen procedures, all hand-operated, to produce a fine bamboo wire. Porcelain bamboo weaving with bamboo wire cross-section of all rectangular. Porcelain bamboo weaving in the production process with both hands and a knife for hand-woven.

Porcelain bamboo weaving products only use the surface layer of bamboo, the fiber is very dense, at the same time, a special treatment, can withstand drying, not deformed, not moth-eaten, water can be cleaned.