The whole process of fireplace manufacturing

The whole process of fireplace production:

Generally speaking, there are two kinds of fireplaces, one is a steel fireplace, which is generally produced in batches by factories, and the other is a masonry fireplace, which is made by hand. At present, steel fireplaces are common and easy to install. The installer only needs to discharge them directly to the reserved position in the room, and the fireplace will not cause the burning of nearby objects because of the overheated appearance.

At the same time, the products also have good after-sales service. Although the masonry fireplace has a nostalgic style in appearance, the construction technology is relatively complicated and the design is not very reasonable, so it is not widely used now.

It is not impossible for the owner to build a brick fireplace, but the process must be careful, otherwise there will be huge security risks. The following is a simple manufacturing process of fireplace: it is made of refractory bricks and refractory cement.

Stainless steel pipe for chimney (125-200). The oven door should be cast iron. If you want to see the fire, you should use the door frame of the cast iron furnace, which is inlaid with glass, but you should pay attention to the imported short high-temperature glass used in the fireplace.

Two dampers (preferably cast iron) are installed under the oven door. Install cast iron fins above the furnace, otherwise the heat will be pulled away. Finally, the chimney must reach 4 meters. The cast iron radiator above the furnace is very important. ) Cast iron is used only because it is durable.