Washing machine disinfector cleaning method

Washing machine disinfector is an essential cleaning equipment in family life, with the passage of time and increased frequency of use, the disinfector may accumulate bacteria, mold and odor inside the disinfector, resulting in the inability to achieve the desired disinfection and cleaning effect. Therefore, regular cleaning of the sterilizer is necessary.

Here is how to clean a washing machine sterilizer:

1. First, turn off the power to the sterilizer and remove the removable parts inside the sterilizer, including trays, partitions, electrode plates and so on.

2. Use a clean towel or paper towel to wipe the debris and standing water inside the sterilizer.

3. Soak the removable parts of the sterilizer in warm water for about 15 minutes, then gently scrub them with a soft brush, and finally rinse and dry them with clean water.

4. Mix 500 ml of water with the right amount of disinfectant solution and spray it inside the disinfectant cabinet, especially to the electrode plate and wall plate, so that the disinfectant can fully penetrate and eliminate bacteria and odors inside the disinfectant cabinet.

5. Close the door of the sterilizer, turn the sterilizer on according to the instructions in the manual, and set the appropriate temperature and time for sterilization.

6. At the end of disinfection, open the door of the sterilizer, replace the gloves inside with new clean ones, wipe the inside of the sterilizer clean again with water and take care to clean the UV lamps.

7. Finally, dry the inside of the sterilizer with a dry towel or paper towel and reinstall the removable parts back into the sterilizer.

In conclusion, it is very important to clean and sanitize your washer disinfector on a regular basis, not only to ensure that your clothes are thoroughly cleaned and sanitized, but also to keep your home environment clean and healthy. It is recommended to clean it once a month to strengthen the family disinfection protection and protect the health of your family.