How to clean baby's water cups and bottles

1. Boiling sterilization method.

Boiling disinfection method is the most common disinfection method in our daily life, we can prepare a separate stainless steel cooking pot for the baby, filled with cold water, the depth of the water must be able to completely immersed in the bottle.

Glass bottles can be boiled in a pot with cold water, wait until the water boils and then put the cap and nipple into the boil, boil for 5-10 minutes to achieve the purpose of sterilization, wait until it dries out and then set back on the bottle.

For plastic bottles, you need to wait until the water boils before putting the bottle, nipple and cap into the pot, and the boiling time should not be too long. Finally, the sterilized bottles should be placed in a clean, ventilated area and inverted to drain.

2. Steam cooker sterilization method.

Steam sterilization is slightly better than boiling, you can use your own steamer or buy a special bottle steamer, it's not easy to burn the bottle. But after the sterilization, the bottle is easy to residual distilled water, is also the need to control the bottle dry water, if there is a drying function is more comprehensive.

3. UV sterilization.

This is a safer way to sterilize bottles and can be considered both effective and convenient. UV sterilization, which can be considered convenient and quick, can be done at low temperatures without causing damage to the bottles. Moreover, most sterilizers come with a warm air drying function, which does not require too much operation, is simple and convenient, and the possibility of secondary pollution is very small.

The above points are the common methods of sterilizing milk bottles, and the following is to share with you the steps of sterilizing new milk bottles.

1. Disassemble each part of the new bottle and wash it with water for no less than 15 minutes.

2. Choose different cleaning tools according to the material of the bottle to clean the hard-to-clean areas of the bottle, using a nylon brush for glass bottles and a sponge brush for plastic bottles, paying attention to the cleaning of the glass bottle wall, the bottle mouth, the threads, the bottle cap and other parts of the bottle, as well as the nipple and nipple holes, which should also be cleaned with a special cleaning tool.

3. According to the characteristics and materials of different bottles, choose a reasonable sterilization method.