How to install downlight matters needing attention in downlight installation

The owner who has done the ceiling will definitely not let the ceiling be empty and unadorned. As a decorative companion of the ceiling, downlight can not only supplement the light source, but also create a beautiful atmosphere. So, how to install the downlight? How many watts do downlights usually use? Next, I will teach you how to install downlights!

First, how to install the downlight

1. Read the instructions carefully before installation to determine the size of the downlight and the size of the opening on the ceiling;

2. After size of the hole is determined, you can determine the location of the hole on the ceiling and mark it. It is recommended to use a small hand saw as a punching tool. If you are not sure, please ask a professional master to avoid sawing the ceiling;

3. Connect the reserved power cord and downlight in the ceiling as specified, and the cable head must be insulated;

4. After wiring connection, adjust the position of the downlight to make the height of the spring piece consistent with the thickness of the ceiling, and then buckle the downlight spring into the plate hole;

After the lamp holder is fixed, you can press the light bulb.

Second, the downlight installation matters needing attention

1, downlight installation position should not be too close to the wall. The downlight will heat up when it shines; Long-term closed use, closed walls will be baked yellow, seriously affecting the beauty of indoor walls.

2. The gas in the downlight should not be too strong. Because the downlight is close to the sofa, direct light will cause harm to people's eyes; It is suggested that the intensity of light source should be 5 square watts, and light with soft color should be selected.

3. After buying the downlight, first check whether the parts inside are good or bad, and whether there is any shortage; When problems are found, feedback them to dealers or manufacturers as soon as possible for replacement.

4. When connecting the lines, be sure to cut off the power supply to ensure that the switch is completely closed to prevent electric shock accidents; Do not touch the surface of the lampshade after the bulb test is lit; The installation location is preferably far away from heat sources and steam sources,

So as not to affect the service life. 5, the choice of installation power supply, according to the number of downlights to determine; It is also necessary to ensure the bearing capacity of the ceiling and whether it can withstand all the downlights.

6. The working environment of downlight is 1 10V/220v under high voltage, which is not suitable for use in the environment of frequent power on and off, causing great loss to downlight.

How to install downlight,

Let me introduce this first. I hope you can learn the corresponding skills and knowledge after reading the article. As a man, if he can't even replace or install a downlight, he is a little lacking in common sense of life!