What is the difference between the integrated prefabricated pumping station and the traditional concrete pumping station?

The differences between the integrated prefabricated pumping station and the traditional concrete pumping station are as follows:

1. The material of the cylinder is different

The cylinder of the integrated prefabricated pumping station is made of glass fiber reinforced plastic, which is corrosion-resistant and durable. However, the traditional pumping station adopts concrete, which has short service life and is easy to leak.

2. The volume and floor space are different.

The integrated prefabricated pumping station is small in volume and floor space, while the traditional pumping station is large in floor space and volume.

3. The control system is different.

The integrated prefabricated pumping station is controlled by a fully automatic intelligent control system without manual attendance, while the traditional pumping station needs manual attendance to control its operation on site.

4. Different installation and use costs

The integrated prefabricated pumping station has simple installation and small civil engineering. Short installation period and low cost. The traditional concrete pumping station has large civil engineering, long construction period, complicated installation steps and high cost.

the working principle of the integrated prefabricated pumping station is that the liquid level information of the pumping station is fed back to the control system by a pressure sensor or a floating ball, and then the operation parameters set by the control system adjust the operation of the pump switch. When the liquid level reaches the level set by the system to start the water pump, the control system will control the water pump to start, so that the sewage will be pumped from the pumping station to the outlet of the municipal sewage pipeline; When the sewage pumping is lower than the set liquid level of the system, the system will control the pump to stop running repeatedly.

Shanghai Lianyu is recommended as the integrated prefabricated pumping station, which should be produced by a regular manufacturer. Shanghai Lianyu prefabricated pumping station is installed as a whole. When the equipment in the pumping station enters the cylinder and the grille needs to be maintained, it will be hoisted directly from the top. The internal pipeline system is equipped with a maintenance platform and a ladder to facilitate installation and maintenance.