How to make lanterns out of white flour?

Method 1: Materials: cloth, 7 iron wires, round plastic and wooden sticks. Manufacturing method: Make four iron wires into an arc, hold the bottom of the white iron wire into a small hook, then make two iron wires into a circle, one on the top and one on the bottom, then wrap them tightly with cloth, and put round plastic on the bottom. Then cut a wire into four sections. Don't hook the wind on the top hook and then tie it to the stick. The last step is to put the candle in! You're done! Method 2: Materials: bamboo strips, cotton thread, glue, iron wire, gauze, candles, cotton thread, bamboo plane, scissors, etc.

1, put the bamboo in the steamer for half an hour and then take it out. As for drying in the shade, it should not be excessively dry or exposed to strong light. 2. Scrape off the rough surface of bamboo with a bamboo plane and cut off the required length of bamboo strips, depending on the size of the lantern. 4. Weaving method: Complete the lanterns in a cross way, and tie several bamboo rings in the middle of the lanterns.

6, paste lanterns, first put on cotton gauze, and then stick two layers of lantern glossy paper. Stick cotton gauze, brush the diluted glue evenly on the surface of the skeleton, then gently stick the cut gauze on the lamp holder, and then brush it flat with a brush dipped in glue. It should be noted here that the glue brush must be a clean brush, otherwise the lamp surface will be messy. At the same time, the pasted paper must be pasted without seams in order to be truly pasted. 7. Put the lanterns in a cool and ventilated place to dry.

8. Painting. Draw according to one's personal preference. 9. After painting, decide whether to write according to the actual situation. When the characters and patterns are completely dried, brush a layer of tung oil, and then dry the tung oil in the shade, and the lantern is finished.