Usage of fishing rod How to maintain fishing rod?

Fishing rod is a special kind of fishing rod. Fishing rods are generally made of bamboo and reeds. So how to use the fishing rod? The following is what I have compiled about the usage of fishing rod, I hope you like it!

Usage of fishing rod 1 Take out the fishing rod in an orderly way.

When using a fishing rod, you should unplug it first, and then slowly pull it out from the rod head in sequence. When pulling out, the force should be even, not too loose or too tight. If it is too tight, it will be difficult to take back that section when hanging the bottom to collect the rod. As long as the rod body is slightly tightened without leaving a gap, the force on the rod body can be uniform, the flexibility of the rod body can be fully exerted, and the rod body can be effectively prevented from breaking.

2. The connection between fishing rod and fishing line should be correct.

Tie the fishing line in a double knot and put it on the red rope tied at the top of the fishing rod. You can use the traditional slipknot, that is, the kind with space beans, to avoid the fishing line falling off for no reason and causing trouble prematurely.

3, operation specification

In the process of fishing, avoid soaking the rod section in water, otherwise it will easily cause the rod body to swell and it will be impossible to collect the rod. When resting, put the pole on the pole frame and don't throw it away at will to prevent others from breaking or stepping on it. When throwing the rod, gently pull the rope to bend the rod slightly, then put your right hand to the front rod and let go of the line with your left hand, so that the bait will fall into the water gently. Never swing the stick directly with both hands like whipping, which will easily hook the sundries in the rear, break the stick, and even hook the crowd in the rear, causing danger.

Step 4 dry the water

After fishing, dry the rod body with a wet cloth in time, rinse the residual bait and dust attached to the rod body with water to avoid pulling the rod body out of the scar, and finally dry it with a dry cloth to prevent the rod body from being soaked by water.

Maintenance of fishing rod Fishing rod is an indispensable weapon for fishermen to attack. A fishing rod (such as the new nano boron fiber fishing rod and the traditional carbon fishing rod) should not only protect its own body, but also protect itself. Even high-grade fishing rods with better performance than ordinary fishing rods will have similar problems if they are not properly maintained. There are seven major issues that need attention.

When pulling out the pole, it should be pulled out from the first section of the pole tip in turn; The joints between the joints are moderately tight, and must not be too loose or too tight. When drawing a sea pole and a rock fishing pole, it is necessary to ensure that each conductive ring is on the same straight line to ensure uniform stress.

When choosing a fishing position, you should pay attention to no obstacles such as branches and poles. Front, back, left and right spaces to prevent the fish from hitting a hard object and breaking the rod when lifting the hook. Because carbon fiber fishing rod is conductive, if the fishing line is wired, it will be life-threatening.

Don't soak the rod in water when fishing, so as to avoid the deformation of the rod or the peeling of the surface coating of the rod due to wet, cold, hot and sun exposure.

In the fishing position, the position of the fishing rod should be selected, and it should not be placed in the aisle to avoid being trampled. When standing upright, the action should be light to avoid the upper pole falling off.

When fishing, don't pull the rod hard if you hang down. You should swing from side to side and try several directions to relax. If you can't fall, try to pull the fishing line by hand. If it doesn't work, we must give up the thread to protect the pole.

After fishing, try to clean up the sediment, dirt, water, etc. Wipe the rod body with a wet cloth, and then wipe it with a dry cloth. Then rub some lubricating oil on the joint or rotate it left and right, and then shrink the fishing rod section by section.

When stored, it should be hung in a cool place, and the rod body should not be hung on uneven objects, and it should not be pressed by heavy objects to prevent deformation.

When buying fishing rods, fishermen usually have to consider the fishing waters and environment, as well as factors such as customary fishing methods and common fishing species. No matter what kind of pole you buy, you should pay attention to:

Length and weight. The length of the hand pole is closely related to the fishing waters, environment and fish species. Fishing in freshwater ponds is usually 3.6 ~ 5.4 meters long. Fishing rods of 6.3 meters and 7.2 meters can be used for fishing in far fishing spots. The components are light in weight;

Rod body. Require the whole pole to be straight and seamless; The rod wall is uniform, the thickness is consistent, and there are no insect eyes, hard wounds, cracks and scorch marks;

When selecting a multi-section drawable hand pole, it is required that the pole should be inserted neither too shallow nor too deep. Take a five-paragraph character with a total length of 5 meters as an example: the insertion depth of the first paragraph is 4 ~ 4.5 cm, the second paragraph is 6 ~ 6.5 cm, the third paragraph is 7.5 ~ 8 cm and the bottom is 8.5 ~ 9 cm. In any case, after insertion, each joint must be closely engaged with the rod mouth. When checking the insertion depth, unscrew the protective cap at the bottom, take out each section and check it carefully to know its depth;

Force. After the whole fishing rod is stressed, all sections are required to be evenly stressed and naturally bent. When buying, straighten each section of the fishing rod, tie a rope at the top of the rod tip, and drop it hard to see if the force is even. If the bending angle of a section is too large, it means that the fishing rod is unevenly stressed.