How to choose the lead content of fish drift?

According to the length of the pole and external factors, the lead consumption of the fish float is selected.

As we all know, the longer the fishing rod, the more difficult it is for us to throw it. So at this time, the lead consumption of our fish floats is relatively large. Generally speaking, the lead consumption 1.0- 1.5 can be selected for fishing rods of 3.6-4.5 meters, and the lead consumption of 2.0 can be selected for fishing rods of 5.4-6.3 meters.

As long as we can ensure the smooth casting, the lead consumption of our float can be relatively reduced.

According to external factors, it is difficult for us to choose the lead content of the float when fishing, such as windy weather. At this time, it is obviously inappropriate for us to choose a float with less lead content. When the wind blows, it is usually accompanied by swimming, because the float in the water will be affected by inertia, so at this time we have to choose a float with a large amount of lead, or even choose to run with lead, which is called lead to resist windy days.

Brief introduction of edible lead content

Lead consumption generally refers to the lead consumption of floats. Add the lead skin wrapped on the float foot into the water for leveling operation, and the weight of the lead skin wrapped on the float foot is the lead consumption of the float. The more lead you eat, the slower and more sensitive the signal is.

Lead consumption of floats is the most important parameter. Because of the different lead consumption, there are often three types of floats: 1, No.2 and No.3. The lead consumption of 1 is the smallest, the lead consumption of No.2 is the middle, and the lead consumption of No.3 is the largest. Among them, 1 recommends fishing in still water, shallow water and light-mouthed fish.